ATTO Technology 1550D Installation And Operation Manual

Text of ATTO Technology 1550D Installation And Operation Manual

ATTO Technology, Inc.

155 CrossPoint Parkway Amherst, New York 14068 USA www.attotech.com Tel (716) 691-1999 Fax (716) 691-9353 Sales support: [email protected] Technical support: Monday -- Friday, 8am-8pm EST [email protected] © 2007 ATTO Technology, Inc. All rights reserved. All brand or product names are trademarks of their respective holders. No part of this manual may be reproduced in any form or by any means without the express written permission

ATTO Technology 1550D 1 ATTO iPBridge provides storage options ........................................1

Features 1.1 Physical components ..........................................................3 Dimensions Environment Power SCSI port Ethernet port Serial port Reset switch LED indicators 2 Installation ..........................................................................................5 Unpacking the packing box; verifying contents Installing the iPBridge Ins

5 Updating firmware ..............................................................................16

Using ATTO ExpressNAV Using FTP 6 Troubleshooting .................................................................................17 Inside out method Check basic diagnostic tools Check the host event log Check the iPBridge event and trace logs Visually inspect LEDs Check for problems on attached devices Check host versions Check iPBridge product versions

ATTO Technology Inc. iPBridge Installation and Operation Manual

1 ATTO iPBridge provides storage options The ATTO bridge family of products provides GbE-to-SCSI GbE-to-Fibre Channel or Fibre Channel- to-SCSI bridges available as embeddable boards, stand alone enclosures that can be fitted for rackmount integration, or desktop units, depending on the model and your needs. The ATTO iPBridge and ATTO FibreBridge family of products share common configuratio
ATTO Technology Inc. iPBridge Installation and Operation Manual 1.1 Physical components The ATTO iPBridge 1550D is a 1-Gigabit Ethernet to Ultra 320 SCSI desktop bridge which produces a cost-effective iSCSI solution for SMB/SME environments. Dimensions Width: 7.5 inches wide Depth: 5.0 inches long Height: 1.76 inches Environment Operating Temperature: 0-70 °C external Ambient air should not exceed 40 °C Humidity: 10-90% non-condensing Power The iP
ATTO Technology Inc. iPBridge Installation and Operation Manual 2 Installation If you have not already completed the instructions on the Quick Start packed with your iPBridge, use the following instructions to install the iPBridge. Unpacking the packing box; verifying contents • The iPBridge Note the serial number of your iPBridge, located on the bottom of the unit, for later use: ____________________________________ • Power cord • Power brick •

Windows users continue to Installing MS iSCSI

Initiator for Windows; Mac users continue to Installing iSCSI Initiator for Mac OS X. If you use Internet Explorer, use Setting up Internet Explorer if needed. Installing MS iSCSI Initiator for Windows 1 Download the latest version of Microsoft® iSCSI Software Initiator from www.microsoft.com/downloads. Searching on iSCSI Initiator usually helps to locate it. 2 Launch the Initiator installation program and
ATTO Technology Inc. iPBridge Installation and Operation Manual 3 Configure the iPBridge To configure the ATTO iPBridge, use ATTO ExpressNAV. Default values are appropriate for most configurations, but may be modified. The ExpressWizard simplifies initial configuration of the iPBridge. Default values are appropriate for most applications. If you wish to change these values, use ATTO ExpressNAV, a browser-based graphical interface. Other methods are also

ATTO Technology 1550D Select the answer to the question Does your

network support Jumbo Frames? 10 Click Next. 11 Data port IP address, subnet mask and gateway information is listed. Change any elements as needed. 12 Click Next. 13 The configuration for the iPBridge based on your input in the previous screens appears. If the information is correct, click Commit. 14 The ExpressWizard configures your iPBridge and storage. You may select items on the left side menu to view the
ATTO Technology Inc. iPBridge Installation and Operation Manual 3.1 Target management Storage devices are mapped using the designations for the iSCSI LUN. The easiest way to map devices is to use the Automatic Target Management feature in the ATTO ExpressNAV interface. CAUTION CAUTION Changing the device map can affect the host’s view of devices and your application configuration. To map SCSI devices, you must connect the devices to the iPBridge SCSI

Multiple target nodes

Multiple targets allow you to create a more configurable mapping scheme which can segregate storage into different iSCSI nodes within the iPBridge, with each iSCSI target having its own set of access criteria. For example, if you have two servers and a library with four tapes and a media changer, the default node would provide both servers access to all tapes and the media changer (default target mode). If you configured multiple t
ATTO Technology Inc. iPBridge Installation and Operation Manual Exhibit 3.1-1 Target node configurations.

3.2 iSCSI configuration

You may fine-tune the iPBridge using the ATTO ExpressNAV interface. Several special iPBridge features may be accessed using the ExpressNAV graphical user interface. For details on each command, refer to CLI provides an ASCII-based interface on page iii of the Appendix 1 If you are not already in the ExpressNAV interface, type the IP address of your iPBridge in a standard browser as found in Using ExpressNAV on page 23, click Ent

ATTO Technology Network Hardware Owners Instructions: