Proluxe Impact X1M Operation Manual

Model #: DP3300M WWW.PROLUXE.COM Version: 51219

the Impact X1M Dough Press with an embedded mold. Proluxe is a leading manufacturer of food preparation and cooking equipment designed for the most demanding commercial kitchens. Proluxe equipment is a result of the highest quality engineering and time-tested design. This manual includes installation, operation, and maintenance procedures for your new Impact X1M Dough Press. Please read this manual carefully and keep it with your machine for proper operation and lasting service. I N S T A L L A T I O N Domestic Use a separate 30 amp AC circuit. Only industrial extension cords with proper wire size should be used; size 16/3 wire for distance up to 25 feet, and size 14/3 for distance up to 50 feet. International Use a designated 16 amp AC circuit. Only industrial extension cords with proper wire size (2.5 sq. mm) shall be used. Make sure there is a proper electrical wall outlet located within reach of the cord and plug attached to the press. Make sure there is a proper electrical wall outlet located within reach of the cord and plug attached to the press. Place the press in an area which allows for “swing clearance” of the lower platen plus vertical and horizontal clearance of the press itself. Limited Machine Warranty Proluxe warrants this dough press machine, when operated under normal conditions, to be free from manufacturing defects in material and workmanship for a period of one year on parts and labor from the invoice date. This warranty will be effective only when Proluxe authorizes the original purchaser to return the product to the factory in Perris, California freight prepaid and only when the product, upon examination, has proven to be defective. This warranty does not apply to any machine that has been subjected to misuse, negligence or accident. Proluxe shall not be liable for the injury, loss or damage, direct or consequential, arising out of the use or the inability to use the product. No claim of any kind shall be greater in amount than the sale price of the product or part to which claim is made. This is the sole warranty given by the company, it is in lieu of any other warranties, expressed or implied, in law or in fact, 1

for a particular use, and is accepted by the purchaser in taking delivery of this product. General Operation: S P E C I F I C A T I O N S Electrical: 120V/50-60Hz/1450W/12.5 Amps Requires 30 AMP outlet Also available; specify when ordering: ● Voltage: 120/240 ● Amps: 12.5/6.04 ● Watts: 1450 Shipping Weight: 200lbs. (82kg.) – DP3300M Includes: 72” cord and 6-30P NEMA approved plug. S A F E T Y S U M M A R Y Warning In case of power cord damage, do not attempt to repair or replace the power cord. Please contact the manufacturer or the local distributor. Avoid touching hot surfaces while operating the machine. Caution During normal operation, the base of the machine must be installed or placed above the wall socket. When servicing or cleaning the machine, make sure that the power cord is removed from the wall socket. 1. Piston Activation Buttons (2) 2. On/Off Power Switch 3. Digital Temperature & Time Control: Factory default temperature setting 200°F. 4. Upper Platen: Heated to help the dough flow faster and evenly. 5. Disengage Switch: Releases upper platen in case of emergency. 6. Thickness Control Dial: Controls the thickness of the dough. (Not available on dough presses with embedded molds.) 7. Lower Platen: Swings out for easy removal of flattened dough. 8. Grease Port: Using a standard grease gun, squeeze a food approved, high temperature grease into the port. 2

coat, approved for use with food products. Molds are probrite coated anti-stick surfaces. O P E R A T I O N T E M P E R A T U R E & T I M E R C O N T R O L FIG. A Solid State Controller This controller has three control features: 1. ​Temperature​ – May be set from 100°F-425°F (38°-163°C) Factory default is 200ºF. 2. ​Time​ – Time may be set from 1 second to 10 minutes. 3. ​Counter​ – Cycle counter counts the number of applications from 1 to 9999 (see additional Notes – Counter). 4. ​2 Lower​ (Fig. A) Refers to models using upper and lower heated surfaces. Controller Operation 1. ​Viewing the Modes of Operation​: To view the set points of temperature, timer and counter, press MODE button to view the desired mode of operation. 2. ​Changing Temperature: Press MODE button until temperature is displayed. Press and hold SET button while pressing the UP (↑) and DOWN (↓) arrow buttons to desired temperature setting. Fahrenheit/Celsius Conversion​: The temperature controller can be programmed to display either ºF or ºC. Press the MODE button until the temperature is displayed . Then push a hold the SET button for 10 seconds. 3. ​Changing Time: Press MODE button until time is displayed. Press and hold SET button while pressing the UP (↑) and DOWN (↓) arrow buttons to desired timer setting. 2. Set the timer in accordance with the following information: ● 2-4 seconds​ –For warm dough with moderate yeast content. ● 2-6 seconds​ – For room temperature dough with moderate yeast content. ● 6-8 seconds​ – For cold dough right out of the refrigerator with low yeast content. 4. ​Resetting the Counter: Press MODE button until the counter is displayed. To reset the counter (# of cycles), simultaneously push UP (↑) or DOWN (↓) arrow buttons (approx. 5 seconds). 3

O P E R A T I O N S Pressing Dough: For best results, your dough should be proofed before pressing, but it will also press directly out of your refrigerator. Flour is not required to press a crust and ​should NOT​ be dusted on any part of the machine. 1. Check to see if you have the correct type of electrical current or serious damage could occur. 2. Press the power button, the green light above will illuminate when powered on. 3. Set your desired temperature on the control panel by using FIG. A and the instructions above. We recommend a temperature of 150ºF. Testing with your own dough may desire a different setting. Note​: Heat is provided in the upper and lower platens enable the dough to flow more rapidly in the pressing cycle. The heat IS NOT intended for baking​. 4. Swing open the lower platen and apply a quick spray of a good water based food release on the platen. 5. Place your pre-portioned ball of dough in the approximate center of the lower platen mold. Add another spray to the top of the dough ball. 6. Close the platen and, with both hands, press the two green buttons on the machine simultaneously. 7. Press the green buttons until it beeps then release both buttons. The timer will actuate and, when the time cycle is completed, the platens will release automatically. (Timer is factory preset for six (6) seconds. Instructions to change the timer is found above under Controller Operations.) 9. Remove the finished product by rotating the upper platen until you have proper space to remove your dough. 10. Remove the crust, place on a pan or peel, add toppings and bake. R E C O M M E N D E D S E A S O N I N G & C L E A N I N G P R O C E D U R E S Before use you must properly season your platens to prevent your dough from sticking. Tools Required: ● Food release ● Soapy water solution ● Washcloth ● Paper towels DO NOT ​use​ ​steel wool or harsh abrasives, it will you will cause costly damage. 1. Before cleaning make sure the unit is turned off. 2. Spray lower platen with approved food release/oil spray. 3. Wipe oil across lower platen with paper towel. 4

5. Mix a warm dish soap and water solution. 6. Soak washcloth and wring to remove excess water. 7. Wipe lower and upper platen with damp cloth. P R E V E N T A T I V E M A I N T E N A N C E Proluxe machines are relatively maintenance free. For a long lifespan, the following preventative maintenance should be followed: Daily Care: 1.​ Platens:​ Turn your machine off and allow to cool down before attempting to clean. These platens should only be cleaned with mild soap and warm water then wiped off with a clean, soft cloth or soft sponge. 2. ​Exterior surfaces:​ Wipe daily with mild soap and warm water. DO NOT use ice or cold water to cool the unit down. This can cause platen to warp. Piston Maintenance: In order to ensure pop and trouble free operation of the press piston, it is important that the machine be lubricated once every three months, under normal operation. High volume users may require more frequent lubrication. Please follow these instructions: 1. Locate the grease port on the machine. Machines will pull down arms has a single grease port located below the upper head on the right side of the vertical post. 2. Place grease gun head against grease port and apply enough pressure to allow gun head to engage the grease port. 3. Squeeze handle of grease gun. This will force the grease into the piston. The lubricant use must be USDA-H-I authorized for food machinery. This lubricant can be ordered through Proluxe, part # 110-002. Service Problems: Contact our factory at (800) 624-6717 (U.S. only) or approved service agency. When contacting the factory for information, parts or service instructions, please provide the serial number of the machine be provided. This number can be found on the serial plate located on the rear of the machine. 5

Problem Cause Action Ref # Power button on digital controller face is depressed but doesn’t turn on. 1. Power cord is not plugged in. 2. Circuit breaker is tripped off in the site's breaker box. 3. Transformer has taken an electrical surge and is damaged. 4. Check voltage on the secondary side of the Transformer. If you read 12VDC then you are receiving voltage to the controller. 5. Possible blown fuse. 1. Plug the power cord into wall receptacle and power button. 2. Reset circuit breaker that the grill is plugged into. Depress Power Button to turn on. 3. Replace Transformer after you check secondary side of transformer. If working properly, you should receive 12vdc. 4. Replace controller. Controller should be on once the power button is depressed. 5. Replace fuse. 68 ----- 91 85 105 Digital controller's LED's are scrambled or randomly erratic. If when turning on, the display will first go to segment check 1. Possibly a component on the Digital controller is damaged. 2. Control needs to reset. 1. Replace digital controller. 2. While unit is on unplug unit, wait for 1 min. Then plug machine on again and depress the power button. 85 ---- Digital controller on startup goes through LED segment check (8888) then to version # and then loops back to to the above reboot. The relay driver on the digital control may be blown. Replace digital controller. 85 Digital display shows PROB. No heat on Upper Platen. Sensor lost it's continuity as shown on a muti-meter. Disconnect prob that is open (no continuity as shown on a multi- meter. Must replace sensor (RTD). Do not cut and splice new sensor. Install new 2000 ohm RTD sensor to under side of heat platen and reconnect to the controller. 41 When depressing the tactile button on digital controller, nothing happens. The tactile buttons under the overlay may be not close enough to activate. Same goes if the buttons are already pressed by overlay without Carefully (no too much at one time to avoid fracturing the traces on the controller) tighten the nuts on the back of the 6

Same goes in reverse if buttons are held down by the overlay. Digital display shows relay and particular zone is overheating. 1. The relay on the switched side is not opening to regulate temperature. 1. Replace the relay. 92 Beeper not functioning or intermittent beeper sound. 1. Beeper on digital control board failed. 1. Replace digital controller board 85 Power is on but hear a leaking of air under the lower platen / swing arm while press is idle. The O'rings are worn allowing the air to pass through the cylinder The cylinder needs o-rings, gasket and new cylinder grease. Request instruction sheet and need to order P/N 110033 for the kit. ---- Press does not close when pressing the two, green, start buttons Did not simultaneously press the start buttons exactly at the same time. Try pressing both buttons exactly at the same time. This is a anti-tiedown safety feature. 2 If setpoint is reached but slightly off in temperature. Offset may need to be calibrated and adjusted. Call (800) 624-6717 ext. 129 for instructions. ---- After activation lower platen and when the cycle is complete, the lower platen either is very slow coming down or doesn’t come down at all. The Mufflers on the Solenoid Valve are dirty and now allowing air from passing though. Replace both Solenoid Valve mufflers. ---- Upon activation, the lower platen is slow to come up and down. Filter encased in a black housing in the back of the machine is dirty. Replace filter. --- Heater platens overheating If the relay (depending on the year of the model) on the coil side are receiving 12vdc indicates the controller is functioning properly. On the switching side of the relay, is there 120 vac going to the heater in question. If there is no voltage on the to the switching side of the relay to the heaters, the relay is not Replace relay If the controller's heat-on LED is not lit indicating the controller is working properly. 92 7

ITEM # DESCRIPTION DP3300MA DP3300MB DP3300MAU B DP3300MAU C DP3300MGB DP3300MGC DP3300MCE B QTY 1 BASE ASSEMBLY 1107201101 1107201101 1107201101 1107201101 1107201101 1107201101 1107201101 1 2 RELIEF STRAIN MPSS168 MPSS168 MPSS168 MPSS168 MPSS168 MPSS168 MPSS168 1 3 POWER CORD 110969174 110969175 1101727721 77 1101727721 77 DP149203 DP149203 MPPW202 1 4 DRIVE CARD, MOTOR 1101017501 1101017501 1101017501 1101017501 1101017501 1101017501 1101017501 1 5 SCREW, PHILLIPS PAN HEAD 8-32 x 3/8 SP83238 SP83238 SP83238 SP83238 SP83238 SP83238 SP83238 12 6 CLAMP, CABLE 9/16" BUNDLE CC916 CC916 CC916 CC916 CC916 CC916 CC916 1 7 WASHER, SAE #8 WSAE8 WSAE8 WSAE8 WSAE8 WSAE8 WSAE8 WSAE8 17 8 SCREW, PHILLIPS PAN HEAD 8-32 x 1/2 SP83212 SP83212 SP83212 SP83212 SP83212 SP83212 SP83212 8 9 WIRE HARNESS LOWER 1101017053 1101017053 1101017053 1101017053 1101017053 1101017053 1101017053 1 10 PLATE, BASE COVER 11010954 11010954 11010954 11010954 11010954 11010954 11010954 1 11 SCREW, PHILLIPS PAN HEAD, 8-32 x 1/4 SP83214 SP83214 SP83214 SP83214 SP83214 SP83214 SP83214 9 12 FEET, RUBBER RF209 RF209 RF209 RF209 RF209 RF209 RF209 4 13 LOWER PLATEN STOP W/WASHER 110102130 110102130 110102130 110102130 110102130 110102130 110102130 1 14 WASHER, SAE 3/8 WSAE38 WSAE38 WSAE38 WSAE38 WSAE38 WSAE38 WSAE38 1 15 NUT, HEX 3/8-16 NH3816 NH3816 NH3816 NH3816 NH3816 NH3816 NH3816 1 16 SWITCH, MICRO ROLLER PLUNGER BZ2RQ18A2 BZ2RQ18A2 BZ2RQ18A2 BZ2RQ18A2 BZ2RQ18A2 BZ2RQ18A2 BZ2RQ18A2 1 17 SCREW, PHILLIPS PAN HEAD 8-32 x 1 SP8321 SP8321 SP8321 SP8321 SP8321 SP8321 SP8321 1 19 FLANGED BUSHING MACHINED 110102167 110102167 110102167 110102167 110102167 110102167 110102167 1 20 SHIM, LOWER PLATEN 1103793220 55 1103793220 55 1103793220 55 1103793220 55 1103793220 55 1103793220 55 1103793220 55 1 21 HANDLE LOWER PLATEN 1106301 1106301 1106301 1106301 1106301 1106301 1106301 1 22 KNOB (MUSHROOM) SWING AWAY 110017 110017 110017 110017 110017 110017 110017 1 23 SHROUD, UPPER PLATEN 1109336 1109336 1109336 1109336 1109336 1109336 1109336 1 24 ARM, MACHINED 1106812101 1106812101 1106812101 1106812101 1106812101 1106812101 1106812101 1 25 SCREW, SOCKET HEAD 3/8-16 x 1 SSH38161 SSH38161 SSH38161 SSH38161 SSH38161 SSH38161 SSH38161 1 26 CLAMP, CABLE 1/2" BUNDLE CC12 CC12 CC12 CC12 CC12 CC12 CC12 1 27 CLAMP, CABLE 3/8" BUNDLE CC38 CC38 CC38 CC38 CC38 CC38 CC38 2 12

29 WASHER, SAE 5/16 WSAE516 WSAE516 WSAE516 WSAE516 WSAE516 WSAE516 WSAE516 8 30 WASHER, 5/16 SPLIT LOCK WL516 WL516 WL516 WL516 WL516 WL516 WL516 4 31 SCREW, SOCKET HEAD 5/16-18 x 1 SSH516181D SSH516181D SSH516181D SSH516181D SSH516181D SSH516181D SSH516181D 4 32 ACTUATOR, 90V DC 3.5" STROKE 1101017601 1101017601 1101017601 1101017601 1101017601 1101017601 1101017601 1 33 DAMPING WASHER 11086050 11086050 11086050 11086050 11086050 11086050 11086050 1 34 POST, LOWER PLATEN 11015960 11015960 11015960 11015960 11015960 11015960 11015960 1 35 TERMINAL, 1/4 Q.D. x 16 GA MALE F/I 1672FIN 1672FIN 1672FIN 1672FIN 1672FIN 1672FIN 1672FIN 2 36 TERMINAL, RING #8, 14-16 GA, ETC#B237-08X 1604 1604 1604 1604 1604 1604 1604 3 37 PIN, ACTUATOR 110791261 110791261 110791261 110791261 110791261 110791261 110791261 2 38 CLIP "E" RETAINING 1/2 MPSC240 MPSC240 MPSC240 MPSC240 MPSC240 MPSC240 MPSC240 4 39 PISTON ASSEMBLY 11086074 11086074 11086074 11086074 11086074 11086074 11086074 1 40 BOLT, LEVEL ADJUSTMENT 1109367 1109367 1109367 1109367 1109367 1109367 1109367 4 41 BOLT, HEX 5/16-18 x 1-3/4 GR5 BH51618134 G5 BH51618134 G5 BH51618134 G5 BH51618134 G5 BH51618134 G5 BH51618134 G5 BH51618134 G5 4 42 CAP, VINYL SC0687 SC0687 SC0687 SC0687 SC0687 SC0687 SC0687 4 43 COLLAR, THICKNESS ADJUSTMENT 11072086 11072086 11072086 11072086 11072086 11072086 11072086 1 44 SCREW, PAN HEAD 10-32 x 3/8 SP103238 SP103238 SP103238 SP103238 SP103238 SP103238 SP103238 1 45 SCREW, PAN HEAD 6-32 X 1/4 NICKLE PLATED SP63214 SP63214 SP63214 SP63214 SP63214 SP63214 SP63214 1 46 TERMINAL, RING #6 1601HT 1601HT 1601HT 1601HT 1601HT 1601HT 1601HT 1 47 ORING #2-238 N-70, PISTON 238N70 238N70 238N70 238N70 238N70 238N70 238N70 1 49 WIRE, TGGT, 14 GA (HEATER) 110069 110069 110069 110069 110069 110069 110069 7.83 FT 50 FORK TERMINAL 14-16 GA, #10 SCREW 1626 1626 1626 1626 1626 1626 1626 1 51 TFE SHRINK TUBING 110131 110131 110131 110131 110131 110131 110131 .33 FT 52 SENSOR ASSEMBLY 2000 OHM RTD 110949110 110949110 110949110 110949110 110949110 110949110 110949110 1 53 SCREW, SET 3/8-16 x 1/2 CUP SST381612 SST381612 SST381612 SST381612 SST381612 SST381612 SST381612 1 54 SLEEVING, PVC WIRE OPVC1050 OPVC1050 OPVC1050 OPVC1050 OPVC1050 OPVC1050 OPVC1050 1.33 FT 55 TERM. QD 3/16 X 18/22GA INS., ETC MOLEX AA2137 2280 2280 2280 2280 2280 2280 2280 2 13

WSAE6 WSAE6 WSAE6 WSAE6 WSAE6 WSAE6 WSAE6 1 57 WIRE, TFE 14 GA GREEN WTFE14G WTFE14G WTFE14G WTFE14G WTFE14G WTFE14G WTFE14G 2.75 FT 58 HOUSING MACHINING 1105332201 1105332201 1105332201 1105332201 1105332201 1105332201 1105332201 1 59 SCREW, BUTTON HEAD 1/4-20 x 5/8 SB142058 SB142058 SB142058 SB142058 SB142058 SB142058 SB142058 2 60 THIN/THICK DECAL DPRO33001 DPRO33001 DPRO33001 DPRO33001 DPRO33001 DPRO33001 DPRO33001 1 61 SCREW, SET 8-32 x 1 SST8321 SST8321 SST8321 SST8321 SST8321 SST8321 SST8321 1 62 WASHER, #8 INTERNAL TOOTH LOCK WLIT8 WLIT8 WLIT8 WLIT8 WLIT8 WLIT8 WLIT8 4 63 NUT, HEX 8-32 NH832 NH832 NH832 NH832 NH832 NH832 NH832 4 64 BRACKET ASSEMBLY THICK/THIN 11072082 11072082 11072082 11072082 11072082 11072082 11072082 1 65 CAM, PIN THICK/THIN ADJUSTMENT 11072083 11072083 11072083 11072083 11072083 11072083 11072083 1 66 THICKNESS ADJUSTMENT KNOB 420085B14 420085B14 420085B14 420085B14 420085B14 420085B14 420085B14 1 67 BUSHING, TENSION THICK/THIN 11072081 11072081 11072081 11072081 11072081 11072081 11072081 1 68 SPRING, COMPRESSION 3742 3742 3742 3742 3742 3742 3742 1 69 WASHER, SPLIT LOCK #8 WSL8 WSL8 WSL8 WSL8 WSL8 WSL8 WSL8 4 70 BRACKET MICRO SWITCH THICK/THIN 11072080 11072080 11072080 11072080 11072080 11072080 11072080 1 71 SCREW, ROUND HEAD 4-40 X 5/8, SLOTTED SR44058 SR44058 SR44058 SR44058 SR44058 SR44058 SR44058 1 72 SCREW, ROUND HEAD 4-40 X 1/2, SLOTTED SR44012 SR44012 SR44012 SR44012 SR44012 SR44012 SR44012 1 73 SWITCH, MICRO V15G31C25K V15G31C25K V15G31C25K V15G31C25K V15G31C25K V15G31C25K V15G31C25K 1 74 INSULATOR, MICRO SWITCH NOMEX 700214 700214 700214 700214 700214 700214 700214 1 75 MICRO SWITCH ADJUSTING PLATE 700213 700213 700213 700213 700213 700213 700213 1 76 SCREW, ROUND HEAD 4-40 X 1 SR4401 SR4401 SR4401 SR4401 SR4401 SR4401 SR4401 2 77 ADJUSTMENT THICK/THIN PLATE 11072084 11072084 11072084 11072084 11072084 11072084 11072084 1 78 SWITCH, MICRO ROLLER WHEEL 1101017044 1101017044 1101017044 1101017044 1101017044 1101017044 1101017044 1 79 PLATE, SLIDE THICK/THIN 11072085 11072085 11072085 11072085 11072085 11072085 11072085 1 80 BUSHING, BUNDYWELD THICK/THIN 11072069 11072069 11072069 11072069 11072069 11072069 11072069 2 81 WASHER, SAE #4 WSAE4 WSAE4 WSAE4 WSAE4 WSAE4 WSAE4 WSAE4 2 82 NUT, HEX 4-40 NH440 NH440 NH440 NH440 NH440 NH440 NH440 2 83 WIRE HARNESS UPPER 1101017050 1101017050 1101017050 1101017050 1101017050 1101017050 1101017050 1 ITEM # DESCRIPTION DP3300MA DP3300MB DP3300MAU B DP3300MAU C DP3300MGB DP3300MGC DP3300MCE B QTY 14

1101017520 1101017520 1101017520 1101017520 1101017520 1101017520 1101017520 1 85 RELAY, MECHANICAL 30 AMP 110942520 110942520 110942520 110942520 110942520 110942520 110942520 1 86 FUSE HOLDER 110729009 110729009 110729009 110729009 110729009 110729009 110729009 1 87 FUSE, 20 AMP 1101017008 1101017008 1101017008 1101017008 1101017008 1101017008 1101017008 1 88 SCREW, PHILLIPS FLAT HEAD 6-32 x 3/8 SF63238 SF63238 SF63238 SF63238 SF63238 SF63238 SF63238 1 89 TERMINAL BLOCK 2 STAGE DOUBLE 6012 6012 6012 6012 6012 6012 6012 1 90 MARKER STRIP 2 STAGE DOUBLE MS6012 MS6012 MS6012 MS6012 MS6012 MS6012 MS6012 1 91 RELAY, SOLID STATE MPR90217 MPR90217 MPR90217 MPR90217 MPR90217 MPR90217 MPR90217 1 92 TRANSFORMER 11096975 11096975 MPPT700R MPPT700R MPPT700R MPPT700R MPPT700R 1 93 OVERLAY DIGITAL CONTROL PANEL ODP1300 ODP1300 ODP1300 ODP1300 ODP1300 ODP1300 ODP1300 1 94 CONTROL, FACIA PLATE ASSEMBLY 11086027 11086027 11086027 11086027 11086027 11086027 11086027 1 95 DIGITAL CONTROL 1101017052 1101017052 1101017052 1101017052 1101017052 1101017052 1101017052 1 96 SPACER, NYLON 1/4 110969111 110969111 110969111 110969111 110969111 110969111 110969111 4 97 WASHER, STEEL 311150019 311150019 311150019 311150019 311150019 311150019 311150019 4 98 WASHER, #6 INTERNAL TOOTH LOCK WLIT6 WLIT6 WLIT6 WLIT6 WLIT6 WLIT6 WLIT6 8 99 NUT, HEX 6-32 NH632 NH632 NH632 NH632 NH632 NH632 NH632 8 100 BUTTON BLACK MUSHROOM P9ARB3N P9ARB3N P9ARB3N P9ARB3N P9ARB3N P9ARB3N P9ARB3N 1 101 SWITCH, MOM P9XPLOSO P9XPLOSO P9XPLOSO P9XPLOSO P9XPLOSO P9XPLOSO P9XPLOSO 3 102 CONTACT N/O SCREW 110101751 110101751 110101751 110101751 110101751 110101751 110101751 3 103 GREEN MUSHROOM BUTTON P9ARB3V P9ARB3V P9ARB3V P9ARB3V P9ARB3V P9ARB3V P9ARB3V 2 104 SCREW, SET 8-32 x 3/16 SST832316 SST832316 SST832316 SST832316 SST832316 SST832316 SST832316 1 105 FITTING, ZERK 1/4-28 B792 B792 B792 B792 B792 B792 B792 1 106 SCREW, BUTTON 1/4-20 X 3/4 SB142034 SB142034 SB142034 SB142034 SB142034 SB142034 SB142034 2 A1 UPPER PLATEN WIRE ONLY DP18031120 K DP18031240 K DP18031240 K DP18031220 K DP18031240 K DP18031220 K DP18031220 K 1 A2 UPPER PLATEN ASSEMBLY COMPLETE DP18031120 AK DP18031240 AK DP18031240 AK DP18031220 AK DP18031240 AK DP18031220 AK DP18031220 AK 1 B1 SWITCH ADJUSTMENT ASSEMBLY 110729100 110729100 110729100 110729100 110729100 110729100 110729100 1 B2 THICK/THIN ADJUSTMENT KNOB ASSEMBLY 11072082A 11072082A 11072082A 11072082A 11072082A 11072082A 11072082A 1 B3 STOP BUTTON ASSEMBLY 11051850 11051850 11051850 11051850 11051850 11051850 11051850 1 B4 START BUTTON ASSEMBLY 11051845 11051845 11051845 11051845 11051845 11051845 11051845 2 C1 LOWER PLATEN ASSEMBLY 11076632K 11076632K 11076632K 11076632K 11076632K 11076632K 11076632K 1 15

Proluxe warrants all products manufactured by it against defects in workmanship or materials from the date of purchase for a period of 1 year on parts and labor. This warranty applies to only equipment purchased and used in the United States. Warranty period shall begin when equipment ships. Warranty travel will only be covered for 60 miles. ALL WARRANTY SERVICE CALLS MUST BE APPROVED BY PROLUXE. IF THIS PROCEDURE IS NOT FOLLOWED, WARRANTY SERVICE WILL NOT BE COVERED. WARRANTY SERVICE WILL BE PAID ON STRAIGHT TIME, OVERTIME WILL NOT BE COVERED. E X C L U S I O N S The warranties provided by Proluxe DO NOT apply to the following: ● Damage due to misuse, abuse, alteration, or accident. ● Improper or unauthorized repairs. ● Submerged in water. ● Damage in shipment. ● Equipment exported to foreign countries. Special Order Equipment and Accessories Cannot be canceled and are not returnable unless defective within the terms of this warranty. In no event shall Proluxe be liable for consequential damages arising out of the failure of any of its products if operated improperly or caused by normal wear or damaged by operator abuse. Limited Lifetime Warranty on Heating Elements If replacement is needed, Proluxe will send the new part at no charge but labor will not be covered unless the unit is still under the 1 year manufacturer warranty. R E T U R N E D M E R C H A N D I S E P O L I C Y Should it become necessary to return any of the company’s products, the following instructions must be adhered to: First, contact our customer service department for approval and a return authorization number. Please have the serial number of your item available at that time. All merchandise must be shipped freight prepaid by customer or service agency. Subject to the inspection of the product by the company, a restocking charge of 20% of the Net purchased price paid to Proluxe will be assessed. Merchandise may not be returned for credit without prior written approval of Proluxe. Collect shipments will not be accepted. No returns after 60 days of original shipment date on machines. Purchased parts may not be returned after 30 days. If upon inspection by Proluxe or its authorized agent it is determined the equipment has not been used in an appropriate manner, has been modified, 17

been subject to misuse, misapplication, neglect, abuse, accident, unauthorized modification, damage during transit, delivery, fire, flood, act or war, riot or act of God, then this warranty shall be deemed null and void. T E R M S & C O N D I T I O N S 1. ​Price List​ prices are suggested retail prices and are shown in U.S. Dollars. 2. ​Terms of Payment: ​1% 10 days, NET 30 days. 3. ​New Accounts​: Satisfactory credit information must be provided before open account status can be extended. Unless agreed otherwise, all shipments will be made C.O.D., Cash in advance. 4. ​Pricing​: Prices, specifications, model numbers, capacities and accessories are subject to change without notice. 5. F​reight/Routing​: Method of shipment will be determined by Proluxe unless otherwise advised by purchaser. 6. ​Damaged Claims​: All merchandise shipped at purchaser’s risk. Inspection must be made by purchaser at time goods are received. If goods are damaged, the PURCHASER shall request that the agent of the transportation company make a written notation on the proper shipping documents immediately and then file a claim for damages. Note​: Goods damaged in shipping are non-returnable. 7. ​Returns​: Machines may not be returned after 60 days. Purchased parts may not be returned after 30 days. A restocking fee of 20% will be assessed on non-warranty returns. 8. ​Taxes​: Prices indicated herein DO NOT include State, Federal, Local or foreign taxes or duties, nor do they include fees, permits, insurance or other levies, all of which are the responsibility of the purchaser. 9. All orders are subject to acceptance by Proluxe. 10. Possession of this price list shall not be considered an offer to sell. 18