Vive LVA1034 Operation & User’s Manual

Lock / Unlock Static Mode mmHg / Lbs Automatic Pressure Monitor

Watch at : bit.ly/mattress8 1. Unfold mattress. 2. Set and position mattress on bed using head and feet icons as guides. 3. Use attached straps to secure mattress to bed. 4. Hang compressor pump over the foot of the bed with the attached hooks. 5. Connect inflation tubes from the mattress to the compressor pump’s inflating nozzles. Make sure they are properly secured. 6. Connect power cable to pump. 7. Connect compressor pump to electrical outlet. 8. Cover mattress with a bed sheet if desired. 9. Make sure the red CPR valve on the side of the mattress is plugged in before turning on the compressor pump. 10 . Make sure all connections are secure and push the Power button. The compressor pump will begin inflating. The mattress will take 50 mins to inflate. Note: When the pump starts, the user can adjust the settings according to the patient’s weight. 11. The compressor pump always displays the air pressure (mmHg) of the mattress. 12. Hold the “Lock/Unlock Mode” for 3 seconds to unlock panel and adjust settings. WHAT’S INCLUDED • 1x 8” Alternating Pressure Mattress • 1x Compressor Pump • 1x Power Cable • 1x Patching Kit • 1x Spare Bladder Replacement • 1-Year Warranty

(mmHg) of the mattress on the display screen. It can also display the patient’s weight in Pounds when adjusting the “Hard or Soft” settings. Power • When pushing the power button for first time, the mattress will begin inflating. This process takes approx. 50 minutes. When fully inflated, the mattress will begin alternating automatically. Hard Mode • Increases the weight capacity in Pounds. Tapping the button each time will increase the weight by increments of 5 Lbs. To increase faster, hold down the button. Soft Mode • Decreases the weight capacity in Pounds. Tapping the button each time will decrease the weight by increments of 5 Lbs. To decrease faster, hold down the button. Static Mode • Makes the mattress stop alternating and all cells will have equal pressure. User can adjust the firmness by pressing the Firm or Soft Key. The display will show the corresponding mmHg / Lbs. Seat Inflation Mode • This allows the patient to set the bed in a seated position. A “S” will show on the display screen. Lock/Unlock Mode • Hold the “Lock/Unlock Mode” for 3 seconds to unlock panel and adjust settings. After 2 minutes of not using the buttons, the panel will lock automatically. OPERATING FUNCTIONS Display Screen (mmHg or Lbs) Power Hard Mode (Lbs) Static Mode Seating Mode (60mmHg) Lock / Unlock Mode Soft Mode (Lbs) Firm Soft Power Seat Inflation Mode Lock / Unlock Static Mode mmHg / Lbs Automatic Pressure Monitor mmHg / Lbs

Mattress/Cover Wipe down the mattress unit with a damp cloth pre-soaked with warm water containing a mild detergent. Air dry the mattress without direct exposure to sunlight. REPAIR GUIDE Watch at : bit.ly/mattress8 SMALL PUNCTURES: Use the patch kit. 1. Fully deflate the unit. 2. Unzip the mattress cover and locate the puncture. 3. Take the patch and add glue around the edges. 4. Firmly place the patch over the puncture. Hold for 20 seconds until glue is dried. 5. Let stand for 30 minutes. LARGE PUNCTURES: Bladder Replacement. 1. Fully deflate the unit. 2. Unzip the mattress cover and locate the puncture. 3. Detach the cell from the two hoses. 4. Remove punctured cell 5. Replace cell. Be sure to thread the replacement cell under the clear plastic holders. 6. Re-attach hoses to cell. Be sure the hoses are securely in place before turning on the unit. SPECIFICATIONS Alternating Mattress • Mattress Dimension 90” (L) x 34” (W) x 8” (H) • Materials Nylon TPU cell, 4 -way stretch nylon PU covering

• Air Output: 7-8 liter/minute • Pressure Range: 10 mmHg - 60 mmHg • Alternating Cycle Time: 14 minutes • Auto Air Control, Sound Alarm, Seating • Static Lock • Size: 10.6” (L) x 5.3” (W) x 3.75” (H) • Weight: 3 LBS WARNING • Minimum Weight: 60 Lbs Maximum Weight: 400 Lbs • Never attempt to change equipment position while connected to the electrical supply. • Never leave equipment exposed to high levels of humidity for extended periods of time. • Never use corrosive cleaning chemicals, acetic solvents or industrial degreasers. GUARANTEE REGISTRATION You are protected by Vive Health’s industry leading guarantees and customer service: If you did not purchase through vivehealth.com, please register at vivehealth.com/register to validate your guarantee. Product Code: LVA1034 ONE YEAR GUARANTEE

We strive to provide you with the best quality products at great value. If you have any questions please contact us. [email protected] 1-800-487-3808 Monday - Friday 9am - 5pm EST