Vacmaster VF408 Operator's Manual

Text of Vacmaster VF408 Operator's Manual

Cleva North America, Inc.

601 Regent Park Court Greenville, SC 29607 Replacement Filters & Accessories available at: Vacmaster.com FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference. 4 Gallon Model No. VF408 Operator’s Manual Wet/Dry Vacuum

TABLE OF CONTENTS

WARRANTY Warranty ....................................................................................................................................... Safety Instructions & Warnings .................................................................................................... Double Insulation Instructions ...................................................................................................... Extension Cords ....

SAFETY INSTRUCTIONS & WARNINGS

IMPORTANT SAFETY INSTRUCTIONS SAVE THIS MANUAL WARNING: FOR FUTURE REFERENCE. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM. Read and understand this operator's manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert, and knowing how your vacuum works. Use this Wet/Dry Vac only as des

DOUBLE INSULATION INSTRUCTIONS

EXTENSION CORDS This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac. When using an extension cord with your Wet/Dry Vac refer

UNPACKING & CHECKING CARTON

CONTENTS Remove all contents from the box. Remove the power head and take out any contents inside the collection tank. Check each item against the carton contents list. NOTE: The hose and accessories for this vacuum are 1.25” (3.2 cm) diameter. A B C D E F G H I J K L M N O P Q R S Carton Contents List: Description............................................ Vac Assembly........................................ Hose.......

GENERAL ASSEMBLY INSTRUCTIONS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN. MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC. WARNING: UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Undo the latches. (fig. 2) 3. Lift the power head off the collection tank. (fig. 3) 4. Remove the contents from inside the collection tank; make sure you ha

DRY VACUUM OPERATION

1 2 3 5 12 6 8 9 7 11 4 10 DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO:

LIQUID VACUUM OPERATION

LIQUID VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAI

1. Verify that the power cord is disconnected from the outlet. (fig.1)

2. Disconnect the hose from the vacuum. (fig. 2) 3. Undo the latches and remove the power head from the collection tank. (fig. 3) 4. Clear all dirt or debris from the collection tank and hose. (fig. 4) 5. Clean the foam filter by washing it with water and mild soap. (fig. 5) 6. Check the hose, attachments, and power cord to verify that they have not been damaged. 7. P

Installing Cartridge Filter

1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Remove power head and place in upside down position. 3. Install the cartridge filter over the filter cage and carefully push filter in until it stops against the power head. (fig. 2 & 3) 4. Place filter retainer on top of cartridge filter and tighten down by turning retainer clockwise. (fig. 4 & 5) Removing and Cleaning C

Vacmaster Vacuum Cleaner Owners Instructions: