uniview technologies Network Video Recorders Manual 

questions or feedback. No part of this manual may be copied, reproduced, translated, or distributed in any form or by any means without prior consent in writing from our company. Contents of this manual are subject to change without prior notice. No statement, information, or r ...

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This product complies with Part 15 of the FCC Rules. Operation is subject to the following two condition ...

illustration. Option 1 (for 1 or 2 disks) 1. Remove the cover, connect data and power cables to disk(s), and then secure disk(s) with screws. 2. Connect data and power cables to the motherboard and then install the cover. Option 2 (for more than 2 disks) You ...

You will open the front panel and install hard disks on mounting brackets. 1. Secure the disk to a pair of mounting brackets (L means left and R means right). 2. Press the latches on both sides (1) and then detach the front panel (2). 3. Align the disk at the slot and then insert the disk gently. 4. Push the disk slowly unt ...

HDMI output 12V DC output CVBS output eSATA interface ...

RUN(Operation)  Steady on: Normal.  Blinks: Starting up. NET(Network) Steady on: Connected to network. GUARD(Arming) Steady on: Arming is enabled. IR  Steady on: Activated for remote control.  Blinks: Authenticating device code. ALM(Alarm) Steady on: Device alarm occurred. CLOUD Steady o ...

to add a camera. To search a network segment, click Search. If a camera is added but live video is not available, check network connection and make sure the correct camera username and password are set in the system. Modify if necessary. Playback Right-click a preview windo ...