Unionvision UFO-01 Quick Start Manual

business-class product. The UFO - 01/02Access Point includes the Unionvision software that allows you to manage your wireless network using your Web browser or App. PRODUCT OVERVIEW The UFO - 01/02 access points deliver high performance and superb user experience for medium density environments. With a maximum concurrent data rate of 1,300 Mbps in the 5GHz band and 450 Mbps in the 2.4GHz band (for an aggregate peakdata rate of 1750 Mbps), UFO Series brings an always-on wireless network experience with the performance requiredfor enterprises. It is ideal for cost-sensitive h ...

Ceiling-mount plate Flat head screws (M3x40, quantity: 4) Locknuts (M3, quantity: 4) Self Tapping Screw (M2.9x20, quantity: 4) Screw anchor (M3x20, quantity: 4) PACKAGE CONTENTS • UFO-01/02 AP • Wall - mount bracket • Ceiling-mount plate • Flat head screws (M3x40, quantity: 4) • Locknuts (M3, quantity: 4) • Self Tapping Screw (M2.9x20, quantity: 4) • Screw anchor (M3x20, quantity: 4) • PoE Adapter (48V, 0.5A) • Power cord PoE Adapter(48V, 0.5A) Power cord* Quick start guide ...

2. Align the ceiling-mount plate to the center of the top side of the ceiling tile. 3. Use a 3.5 mm drill bit to drill holes for the four flat head screws. 4. Cut or drill a circle approximately 18 mm in size. This will be used for the Ethernet cabling. ...

be connected to the switch interface. The POE port on the power supply should be connected to the AP interface. The UFO - 01/02 is powered by the included PoE (Power over Ethernet) adapter. To install the AP, perform the following steps: 1. Connect an Ethernet cable to the Ethernet port on the UFO-01/02 AP. 2. Connect an Ethernet cable to the LAN port on your switch to the LAN port of the power adapter. 3. Connect the power cord to the power port on the PoE Adapter. ...

browser-based interface for easy configuration and management. Or you can download and install the latest version of the UFO-01/02 mobile App. 1. Open your web browser. 2. Set the computer IP address to be:192.168.1.X 3. Go to the Address bar and enter the IP Address:192.168.1.8 4. The Unionvision software login screen will appear. Enter the password in the appropriate fields and click Login. Password: unionvision You can use the management interface to manage your wireless network and view the network statistics. The software should be the latest version. ...