Whacker Verve 2.0 Installation & User Manual
Text of the manual
Contents
Chapter 1 Safety & Precautions for Installers & Users..............................................................................5
Safety Messages to Installers & Users Before Installation.................................................................5
Safety Messages to Installers & Users During Installation...............
CHAPTER 1
Safety and Precautions for Installers & Users
For the safety of installers and users please read this manual thoroughly before installing, operating and servicing
the Whacker Technologies Verve 2.0. The safety guidelines and instructions throughout the user manual are
reminders to exercise caution and care�
During Installation and/or Service
●
Ensure that all equipment and wiring do not interfere with any airbag equipment or its ability to function
properly.
●
Separate all equipment from twoway radio equipment even if the equipment is equipped with the proper
insulation. To avoid interference with some equipment m
CHAPTER 2
Introduction to the Whacker Verve 2.0 LED Full Size Light Bar
The Whacker Verve 2.0 is an exterior, roof mounted 360 degree warning light system that can be utilized by
professionals in a wide range of industries. The Verve 2.0 is currently available in a 50” model with universal or
vehicle specifi
CHAPTER 3
Installing the Whacker Verve 2.0
After unpacking the Whacker Verve 2.0, carefully inspect the unit for damage that may have occurred during transit.
If any damage has been found report the damage to the carrier and keep the original shipping carton until the claim
has been resolved and do not install�
surface plate.
3. Position the four bolts at the opening to the mounting track and slide the mounting foot into the desired location
on the track.
4. Install four flat washers, lock washer and nuts on the bolts, leaving the bolts just loose enough to reposition the
mounting foot if necessary. Do not tighten t
CHAPTER 4
Wiring the Whacker Verve 2.0
Before wiring the lightbar in the vehicle, ensure that the lightbar is properly installed and secured to the vehicle with
the factory included mounting kit.
This lightbar is completely wired at the factory and does not need any additional internal wiring. Most standard
functi