Wetstyle LINEA VANITY Installation Manual
Text of Wetstyle LINEA VANITY Installation Manual
- FRAME LINEA VANITY INSTALL GUIDE -
(2018-05-07)
1/8
FRAME LINEA VANITY INSTALLATION GUIDE
INDEX
Before you begin
p.1
Installation
•
Wall preparation
p.2
•
Plumbing
p.3
•
Wall-mount installation
p.4
•
Sink anchoring
p.5
•
Drawer adjustments
p.6
•
Cleaning guide
p.8
•
Warranty
p.8
BEFORE YOU BEGIN
Thank you for choosing from WETSTYLE’s line of quality products.
Please note that prior to shipment from the manufacturing facility, the furnitur
- FRAME LINEA VANITY INSTALL GUIDE -
(2018-05-07)
2/8
WARNING!
To reduce the risk of fire, electric shock, or injury to persons, please read these instructions
thoroughly before using this product.
Important Safety Instructions must be kept for future use.
TOOLS AND EQUIPMENT
• Drill and bits
• Measuring tape
• Protective paper
• Pencil
• Level
• Protective eyeglasses
• Wood screw #8, 5/8" and 1-½" long
• Wood screw #10, 3" and 4" long
IM
- FRAME LINEA VANITY INSTALL GUIDE -
(2018-05-07)
3/8
VANITY PREPARATION
Prior to installation,
PLUMBING
The pipes should be positioned at an approximate height of 21-3/4" or within the
connection area depicted below.
IMPORTANT
Please be advised that the LINEA COLLECTION was designed to receive WETSTYLE sinks as
noted in the WETSTYLE price list and catalogue. The manufacturer does not take
responsibility for the use of third party sink or countertops in co
- FRAME LINEA VANITY INSTALL GUIDE -
(2018-05-07)
4/8
WALL-MOUNT
ATTENTION: Vanity is to be hung onto the provided Z clip.
1.
Remove Vanity drawers and cover glides with masking tape to protect them
from dust.
Drawer Insertion and Removal
Insertion
Removal
2.
Remove Z-clip from back of vanity. Align and level the Z-clip according to
horizontally reinforced studs and desired Vanity height.
3.
Install Z-clip to the wall studs at 25-1/4” center line, using
- FRAME LINEA VANITY INSTALL GUIDE -
(2018-05-07)
5/8
Sink Anchoring
1.
CAUTION: If needed, drill faucet holes before installing sink onto the vanity.
Please refer to tap drilling instructions at www.wetstyle.ca
2.
Gently position and align Countertop Sink onto Vanity.
3. Fasten Sink with provided L-Bracket within Vanity using 5/8’’ long #8 wood screws.
Note: The underside of sink is fitted with wooden inserts for anchoring purposes.
Wood screws should
- FRAME LINEA VANITY INSTALL GUIDE -
(2018-05-07)
6/8
DRAWERS
Drawer façade adjustments
Deep
10 1/2’’
Drawer
Short
7 1/4’’
Drawer
- FRAME LINEA VANITY INSTALL GUIDE -
(2018-05-07)
8/8
CLEANING GUIDE
WETSTYLE «FRAME LINEA» FURNITURE is made from Oak or Walnut.
WETSTYLE Furniture is ultra-easy to clean: after use, simply wipe with a soft cloth to remove
any surface dirt. For standard cleaning, we recommend using warm water with mild soap.
Do not use abrasive products or cream cleaners. Never use petroleum-based products
when cleaning the wood, i.e. paint thinners or other solvents, a