Siemon HD5 Instructions

on either side of the panel as shown. Tighten to 10-15 in.-lbs (1.1-1.7 N-m). Lock washer should be installed on nut side of panel. 2 HD5® Screened Patch Panel Instructions Place the screened HD5 Panel (P/N: HD5-S) on sturdy surface as close to rack as possible and remove rear cover. If cable slack does not allow this, moun ...

Secure cables to strain relief tabs with cable ties provided and trim excess. The cable tie provides cable strain relief. 12 Tighten screw for ground clip until it bottoms out. Note: Remove excess foil that is not in contact with ground clip. 13 Terminate wires to the S110 connecting blocks. Note: This can be perfor ...