Siemens SIMATIC IPC847C Getting Started

� SIMATIC IPC847C� ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ SIMATIC Industrial PC SIMATIC IPC847C Getting Started 06/2011 A5E02669190-03 Introduction 1 Description 2 Application planning 3 Installing 4 Connection 5 Co ...

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbo ...

3 Table of contents 1 Introduction................................................................................................................................................ 4 2 Description............................................................................................................. ...

Introduction 1 Objective of this documentation This Getting Started documentation contains all the information you need for commissioning and using the SIMATIC IPC847C. Scope of validity of this document This documentation is valid for all supplied variations of the SIMATIC IPC847C and describe the d ...

5 Description 2 2.1 External structure Front view of the device (example) Item Description ① Front panel with vent openings (filter mat and fan behind the front panel). Check the filter mat regularly for soiling and, if appropriate, replace it. ② Status displays ③ Cover screws ④ On/off button � ...

SIMATIC IPC847C 6 Getting Started, 06/2011, A5E02669190-03 2.2 Operator Controls WARNING The on/off button and on/off switch(es) do not disconnect the power from the PC! Note Data may be lost when the PC performs a hardware reset. Operator control element Item Description ① On/off button Used to switch the device on or off ...

SIMATIC IPC847C Getting Started, 06/2011, A5E02669190-03 7 Operator control element Item Description ③ On/Off switch (redundant power supply) Used to connect the device to the mains. Depending on the "After Power Failure" BIOS setting, the PC may turn on automatically. Otherwise, you may have to operate the on/off button ...

SIMATIC IPC847C 8 Getting Started, 06/2011, A5E02669190-03 Layout of the interfaces on the rear of the device � � �� �� �� �� Item Designation Description PROFIBUS/MPI PROFIBUS interface (RS 485, electrically isolated), 9-pin D-sub socket (optional product characteristic) ① PROFINET CP-1616 onboard in ...

SIMATIC IPC847C Getting Started, 06/2011, A5E02669190-03 9 Power supply Position of the connector for cooling devices Description �� Power connection socket ⑯ for the power supply of the device. The permitted voltage range is 100 to 240 V AC. �� Power connection socket ⑯ in case of redundant power supply of the ...

SIMATIC IPC847C 10 Getting Started, 06/2011, A5E02669190-03 2.4 Status displays Front status displays Display Meaning LED Description OFF isolated from mains YELLOW Standby (hibernating) POWER PC status display GREEN PC in operation OFF no access HDD Display for hard disk access GREEN Access OFF  No connection  No data t ...