Siemens SIMATIC Vision Sensor VS 130-2 Manual 

VS 130-2/VS 130-2vcr Manual Edition 09/2005 A5E00475759-01 ...

Postfach 4848 90437 NÜRNBERG GERMANY Copyright © Siemens AG 2005 A5E00475759-01 Siemens AG 2005 Technical data subject to change. Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety ...

This manual describes the vision sensors SIMATIC VS 130-2 and VS 130-2vcr. It helps to install, commission and operate the sensors. The documentation addresses personnel concerned with the engineering, commissioning and service of automation systems and visualization equipment. Guide The manual contains the following guides whic ...

VS 130-2vcr and the S7 automation system, we provide a range of training courses. Please contact your regional training center or the central training center in Nuremberg, Germany. Telephone: +49 (911) 895-3200. Internet: http://www.sitrain.com Technical support How t ...

1.2 Components ..................................................................................................... 1-4 1.3 Processing Configuration............................................................ ...

5.3 Working with the Setup Support.............................................................. ...

8.2 Standards and Approvals ................................................................................. 8-6 8.3 Installation Dimensions................................................................................... ...

type ECC200 (with the exception of the types "Structured Append" and "Reader Programming Code") and the codes PDF417 and QR (with the exception of the types "ECI Code", "Byte Code", "Kanji Code", "Structured Append" and "FNC1 Code"). Th ...

SIMATIC VS 130-2/VS 130-2vcr can read codes, match the entire code or part of it with a trained code and relate (verify) the quality values of the currently read code to the quality values of a trained code. The entire read character string or only part of it (in other words, filtered) can be output. When ...