SICO Z3 Operation & User’s Manual

USER'S MANUAL << CONTENTS >> 1. What's 3D GYRO PEN MOUSE? 2. Components 3. Specifications 4. Installation 5. RF Tranceiver(ID Setting) 6. ID Resetting 7. How to use 1) Functions 2) Mouse Grip 3) LEDs ...

3D GYRO PEN MOUSE adopted 3 dimension space identification sensor for user's convenient use in free space by any pose, which completely differentiates it from either ball or optical mouses. Z3 mouse enables the user to control his or her PC internet or presentation in extended area as wide as 10m with no restriction in space and direction by free simple movement of wrist. Furthermore it is a completely new innovative mouse. By ...

ㆍ Software : Windows 98, Windows NT, Windows 2000, Windows XP. ㆍ USB port installed ㆍ Driver : Microsoft Compatible (No additional drivers to install) ㆍ Operating Environment : 0℃ ~ 40℃ ㆍ Storage Environment : -5℃ ~ 70℃ Property Z3 PEN MOUSE RF Receiver Operable Distance 10 M 10 M Battery - 3.6 _ 0.6 v - AAA battery 3pcs - NiMH Battery ...

-. Preset ID when manufactured, therefore no need to set ID. When the mouse do not operate even after USB port installation, please set ID as below. ① Connect RF receiver to USB port. ② Power switch "1" on. ③ Press "B" ( ID set button ) of RF receiver and simultaneously press "6" (ID set button) of Z3 mouse until LED(green) of Z3 mouse lights on . ④ When ID setting is complete, LED( green ) of Z3 mouse lights on. ⑤ Release '6' ...

1) Buttons / Functions 1. Power switch ON / OFF 2. Left button of ball mouse 3. Right button of ball mouse 4. Laser beam button for presentation 5. Auto scroll 6. ID set button ( Setting frequency to RF receiver) 7. Active Button 8. DC power 9. Laser beam outlet A. USB connector B. ID set button ( Frequency setting button ) 2) Mouse Grip This 3D mouse is using Gyroscope sensor and adjustin ...

③ When using it for presentation, use the laser beam - the upfront button ※ Tips for accurate operation : Keep the mouse as even as possible and use the wrist to control. Grip the mouse so as the active button touch the life-line on the palm. 3) LEDs ① Front LED : Shows operation status ▶ Standard Operation : When power switch on, green light on and off. And when grip th ...

RF Receiver ▶ When setting ID : When press the ID set button, LED light will on-and-off in short interval. Standard operation: When the power switch of mouse is on, the receive LED light will on. ( If receiving is not through or the power switch is off, the LED light will off.) ▶ When press the active button of Z3 mouse, the receiver LED light will on-a ...

▶ Z3 mouse identify the location in space by Gyro sensor and the mouse must be kept even. However even if the mouse was in slide, it can be automatically refreshed by keeping it even again for a while ▶ When the wrist direction is not in parallel to the cursor direction, release the pressed active button and keep the mouse in even position for a while, then press the a ...

(1) Mouse operation speed can be adjusted in motion, speed, shadow etc to the user's convenience, including right or left hand conversion. (2) When accustomed with Z3 mouse operation, the user can take even the advantage of inertia. 8 FCC COMPLIANCE STATEMENT THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION; (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENC ...