Zowaysoon T-1000S Operating Manual
Text of the manual
2012 T-1000S Operating manual
1、T-1000S System features
1、32—256 Gray level,Support software Gamma correction。
2、Support the rules and special-shaped handle.
3、Single-port output,can support 2048 pixels。
4、Off-line(SD Card) control, play back content stored in the SD card.
5、T-1000S store a maximum of 16 programs,copy multiple fil
divided into high
and low
TM1903,TM1904,TM1909,
TM1912
T-1000-TM19
2048 pixels
UCS6909
,
UCS6912
,
UCS7009,UCS5903
T-1000-U
4、Definition of printing:
DC5V
+5V power input
GND
Power GND input
7.5-24V
+7.5-24V power input
电源灯POWER
Power indicator
错误灯ERROR
Error indicator
SD 卡SD CARD
SD card slot
TTL signal(245/spi signal): RS485 signal.
NOTE:For the TTL(SPI) signal, the controller signal ground must connect to the LED ground directly.
5
Multiple T-1000S controllers can be cascaded together and work synchronously.
2.
T-1000S one TTL(SPI) signal and one RS485 signal port output,can control 2048 pixels/lamps;
3.
When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the
controller. If the chip for LED is double line chip with DAT and
“01_1.led” --------- NO.2 program for No.1 controller
“02_1.led” --------- NO.3 program for No.1 controller
……
“15_1.led” --------- NO.16 program for No.1 controller
The name for NO.2 controller:
“00_2.led” --------- NO.1 program for No.2 controller
“01_2.led” --------- NO.2 program for No.2 controller
“02_2.led” --------- NO.
Working temperature :-30℃—85℃
Working voltage:DC5V / DC7.5-24V
Working power:1W
size:L165mm×W80mm×H30mm
weight:0.35KG
signal port:3pin connect port
Note:
Before copy files to SD card ,The SD card must be formatted as FAT format
The SD ca
②The effect file in the SD card and the controller model are not match, please choose correct controller
model in LedEdit and then re-create the effect file *led.
③SD card did not format to FAT before copy effect files.
④Please check the supply power voltage, the controller can be individually powered to exclude power
reasons
⑤Changing the