Zoom G1 Operation Manual

Operation Manual Multi-Effects Processor © 2018 ZOOM CORPORATION Copying or reprinting this manual in part or in whole without permission is prohibited. Product names, registered trademarks and company names in this document are the property of their respective companies. All trademarks and regis- t ...

combinations and parameter settings can be saved as patches to be used whenever you like. By simply switching between preset patches, you can achieve dramatic changes in sound. This processor includes a wide variety of effects, including disto ...

Patch A “patch” stores effect ON/OFF states and parameter setting values. Effects are saved and recalled in units of patches. Five effects can be added to one patch, and the can store up to 50 patches. Bank One group of 10 patches is a “bank”. Patches can be quickly recalled by switching banks. The has 5 banks. Effect type ...

Contents ……………………………………………… 4 structure………………………… 5 Names of parts ……………………………………… 7 Loading batteries …………………………………… 9 Connecting 10 Adjusting the overall audio character and output level 11 Usin ...

Signal flow AUX IN INPUT OUTPUT 11 2 3 4 5 Patch Patch level Output EQ Output volume Tuner Effect Looper Rhythm The input guitar sound passes through effects 1 – 5 in order. ( “Using patches (MEMORY mode)” on page 12) The patch level is adjusted. ( “Using patches (MEMORY mode)” on page 12) The overall sound is adjus ...

The can save up to 50 patches. Patches are managed in banks of 10. Patch 10 Patch 11 Patch 12 Patch 13 Patch 14 Patch 15 Patch 16 Patch 17 Patch 18 Patch 19 Bank 1 Patch 20 Patch 21 Patch 22 Patch 23 Patch 24 Patch 25 Patch 26 Patch 27 Patch 28 Patch 29 Bank 2 Patch 30 Patch 31 Patch 32 Patch 33 Patch 34 Patch 35 Patch 36 Pat ...

Front Panel Display This shows information, including the names of the selected patch and its effects and their parameter values. Mode switch Press this to cycle through the MEMORY, STOMP and EDIT modes. Parameter knobs Use these to adjust effect parameters and to make various settings. RHYTHM button Press to activate the rhythm. Effect/ ...

only) When an effect in the PEDAL category is selected, this adjusts the amount of that effect. ( “Setting pedal effects” on page 53) Rear Panel Pedal switch ( only) When an effect in the PEDAL category is in use, this turns that effect ON/OFF. Input jack Connect a guitar here. AUX IN jack Connect an audio device or other extern ...

2. Close the battery compartment cover. NOTE Set the type of battery used correctly so that the amount of remaining battery charge can be shown ac- curately. ( “Setting the type of batteries used” on page 35) HINT • If a dedicated AC adapter ...

2. To use AC power supply, connect to the dedicated AC adapter (ZOOM AD-16) to the AC adapter jack and an outlet. This turns the power ON. 3. To use a computer, connect a USB cable (not included) to the USB port and the computer. When using USB bus power to operate the , connecting this cab ...