Yakima Viper Installation Instructions

Text of Yakima Viper Installation Instructions

Round Bar &

Square Bar Load Crossbar Spread* Limits 16" (41cm) spread = 30 lbs. (13.6kg) / bike 1 or 2 bikes Type of Rack DO NOT EXCEED RACK WEIGHT LIMITS! HEX KEY (1X) SNAP AROUND (1X) CARRIAGE BOLT (1X) LOCKING SKEWER (1X) END CAP (1X) WHEELSTRAP (1X) VIPER (1X) 16" - 42" 41cm - 107cm 18" - 42" 46cm - 107cm 3 or more bikes 18" (46cm) spread = 40 lbs. (18.1) / bike This hidden swiTch enables safe mounTing ouTside The Towers. *CROSSBAR SPREAD Your crossbar

BETWEEN THE TOWERS

Viper can slide along the bar for easy repositioning, even when locked and loaded. Install tray bolt, wheel strap and end cap. Secure opposite end. Insert bolt head into slot in tray. If you have SqUARE BARS, loosen the tabs by bending them repeatedly. Remove the tabs with scissors or pliers. Install the wheel strap with the red button toward you. short bikes or wide crossbar spreads may require the strap to go on before th

Close the lower

plate, then press the silver hook. CLOSE THE RED COVER. it should close with firm resistance. If not, repeat the previous step, being sure to press the silver hook. ATTACH THE HEX KEY AND TIGHTEN COMPLETELY. ChOOSe yOuR MOuNTING OPTION (Read A & B below). TO REARRANGE THE VIPER AFTER INSTALLATION: • Lift the red cover, loosen the hex key. • Reposition. • Close the red cover, tighten the hex key. conVenIent RepoSItIo

Use extra caution when

installing, or removing bikes with CARBON FIBER FORKS. Fork tips can crack, or bend if bike is not loaded vertically. Remove the front wheel, and load the bike. Secure the rear wheel. Lock the Viper. ATTACH THE SHAFT TO THE LEVER. If you have purchased a lock, follow lock core instructions to install the lock. Pull the strap through wheel spokes. SOME BIKE WHEELS MAY PREVENT A TIGHT FIT. • Insert the strap end behind

Yakima Viper LOOSEN OVER TIME.

CHECK AND TIGHTEN IF NECESSARY, BEFORE EACH USE. MAINTENANCE The Viper has a self-lubricating internal mechanism. it is not necessary to add lubrication. DO NOT TRANSPORT BICyCleS WITh attached baby seats, panniers, wheel covers, or full bike covers. Test bike stability by Tugging on fork leg. K e e P T h e S e I N S T R u C T I O N S ! BeFORe DRIvING AWAy: • check the security of the forks; close

Yakima Automobile Accessories Owners Instructions: