SilverOnyx CF376BLE Operation & User’s Manual

(kcal), bone mass and visceral fat. WORKING THEORY This device is based on the BIA (Bioelectrical Impedance Analysis) technology. To measure body bioelectrical impedance, it makes the results much more accurate with new measuring technology. The reason is human body fat is not conductive, however muscle and water are good conductors. This device measures bioelectrical i ...

not be considered as a medical opinion. • Consult your primary care doctor or physician before making changes to your diet, exercise plans or physical activities. • DO NOT stand on the edge of the scale or jump on it! • Always use scale on a hard, dry, and flat surface. • Make sure your feet are clean before stepping on the scale. • Connect the batteries in accord ...

iOS devices: iPhone4S, iPad3, iPad Mini, or higher Android devices: Android 4.3 or higher, with bluetooth 4.0 or higher; memory capacity no less than 1G. How to install the app on your device? Download “iWellness4.0” from Google Play, or “iWellness” from App Store. 1. Make sure your phone or tablet has an Internet connection. 2. Search for and download “iWellness4.0” in Google Play, or “iWe ...

installation is complete. 4. Tap “iWellness4.0” icon to launch the application. How to use iWellness 4.0 / iWellness? 1. Check your device settings to make sure Bluetooth is Enabled. 2. Tap to open “iWellness4.0 / iWellness” application. 3. When opening the application for the first time you will need complete the following steps: a. Tap “Scale” and select ...

this user (optional). c. Enter the users name, gender, preferred weight unit, birthday, height, current fitness level, and target weight. Review and tap “Save” to confirm. d. You are taken back to the main screen, and you can start testing now. NOTE: The application will go directly into the main screen the next time it is opened. 4. Check again to make sure Blue ...

on the main page. To get complete data, please step on the scale with bare feet. 6. For browsing history data, graphs and lists: Tap the arrow on either side of the weight circle on the main page to view previous readings. Tap on any of the eight parameters on the main screen (weight, body water, body fat, bone, BMI, visceral fat, BMR, or muscle sass) to ...

icon in the upper right corner. You can share selected data to platforms such as Facebook, Twitter, Email, SMS etc. ...

the main screen. 9. For application settings tap the “Settings” button in the lower middle area of the main screen - you can reset user data, choose the scale type, export data to a text file, and view application data. 10. To remove all measurement data for the current user, tap the “Delete” button in the lower right corner of the main scre ...

1. Locate the “Health” app on your device. 2. When you are using iWellness for the first time, you will be asked for permission to update data from iWellness to HealthKit - you should verify that “iWellness” is shown on the “Sources” screen of the Health app. If you do not allow permission initially, you can change the settings by opening the Health app and tapping “Sources” - then tap "iWellness" and c ...

Measurements” - you will see the latest health data updated from iWellness. ...

1. How can I recalibrate the scale after moving it? - Simply step on the scale to let it power on - Let the reading drop to 0.0kg/0.0lb and calibration will be complete Note: The scale will be inaccurate if it is not recalibrated. 2. Display indicates "Err" when weighing. - Overloaded the maximum range (182.5kg / 405.51b) Tip: When overloaded, do not stand on the scale for a long time. The service time of the senso ...

loaded for long periods of time as it may damage the weight sensors and the scale will not be accurate. 2. Do not put anything on the scale if not in use. This will consume power and reduce the lifetime of batteries. 3. Keep the product clean and dry; Keep away from water; Avoid slipping from scale which may damage the inside electric circuits when weighi ...