SkyTracker STX-1-2000 Instruction Manual

INSTRUCTION MANUAL 4350 McKinley Street • Omaha, Nebraska 68112 USA Tel (402) 453-4444 • Fax (402) 453-7238 • www.skytracker.com Rev. August 2007 ...

1.0 INTRODUCTION...............................................................................................1 1.1 Model Designation..................................................................................1 2.0 SAFETY .....................................................................................................1 3.0 OPER ...

5.7 Motion Drive Train.................................................................................15 5.8 Motion Assembly...................................................................................16 5.9 Drive Chain Tension Adjustment........................................ ...

system, which was originated by SkyTracker of America, Inc. and is proprietary to Ballantyne of Omaha, Inc. Patents, owned by SkyTracker or Ballantyne of Omaha are either issued or pending in this and related concepts. TRADEMARK The name “SkyTracker” ...

display advertising industry and related technologies. Each unit is designed with highly reliable mechanical, electrical and optical components to insure extended, trouble-free performance. An outgrowth from space age and military advanced technology a ...

products are installed, operated, maintained, or utilized after the product leaves the manu- facturing facility, it can not be held responsible for any injuries resulting from improper installation, use, inadequate maintenance, or any other condition beyond its control. It i ...

source or into the light beam. It is the responsibility of the operator to see that the neces- sary rope barriers or other barricades are positioned suitably to prevent passers-by or any member of the crowd from looking directly into the light beams from a clo ...

to that particular phase. On the STX-4 models, when all three lights are lit (two on single phase STX-4 – 2000’s), the unit is “powered” and ready to function. STX-1 units do not have pilot lights. NOTE: It is not detrimental to the SkyTracker units to lea ...

To choose not to light a particular lamp of an STX-4, the Control Panel has an individual “Lamp OFF” switch for each head. Operation of this switch will disable the indicated lamp. 3.2.3 MOTION “ON” The motion feature of the SkyTracker is initiated by turning the “Motion” switch to the “ON” position (up). NOTE: If ...

iliary circuit breaker protects the cooling blowers and the control circuits. Each xenon lamp power supply is internally fused. The motion motor is protected with an individual circuit breaker. STX-1 units are provided with a single circ ...