Skyjacker TRU25 Installation Instructions

Text of Skyjacker TRU25 Installation Instructions

Bill Of Material

SC2567. . . . . Stem Cushion . . . . . . . . .4 BS3112 . . . . . .Bump Stop . . . . . . . . . .4 TRB10-S . . . .Tie Rod Boot . . . . . . . . .2 10MMx50MMB . 10x50Met.Bolt/10.9 . . .6 10MMN . . . . . . .10mm Nut . . . . . . . . . . .6 B10RS . . . .Shock/Strut Boot. . . . . . . .2 BTIE . . . . . . . . .Cable Tie . . . . . . . . . . .2 GP2 . . . . . .Grease Pack, 2oz. . . . . . . .2 Bill Of Material Part No. Description Qty. TP

CAUTION: BEFORE BEGINNING INSTALLATION.

READ INSTRUCTIONS CAREFULLY AND COMPLETELY. 1. Raise up the rear end with a floor jack. Place jack stands under frame, but also allow the rear suspension to move up and down freely with the floor jack. 2. Disconnect lower shock mount bolts/nuts. Lower axle with floor jack so that the rear axle droops and the coil springs become loose. 3. Disconnect the panhard bar at the drivers side of the axle. 4. Remove the coil s

Skyjacker Automobile Parts Owners Instructions: