YARDMAX G200FA Operator's Manual
Text of the manual
Save This Manual for Future Reference
Tame the Great Outdoors
TM
Gasoline Engine
Operator’s Manual
FOR YOUR SAFETY
READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING MACHINE
MODEL NUMBER
G200FA
SERIAL NUMBER
PURCHASE DATE
Both model number and serial
number may be found on the
main label. You should record
both of them in a safe place for
future use.
TAblE OF COnTEnTS
Your new YARDMAX™ engine offers quality construction,
and is easy and safe to operate. With proper use and
care, it is designed to give you many years of dependable
service.
Prepare to experience the durability to take on any job
with the ease, portability, and convenience of your new
engine!
Discover the YARDMAX Advantage
At YARDMAX, we
Carefully read through this entire operator’s manual
before using your new engine. Pay attention to all
cautions and warnings.
ENGINE SERIAL NUMBER
DISCLAIMER
YARDMAX reserves the right to discontinue, change,
and improve its products at any time without notice
or obligation to the purchaser. The descriptions and
specifications contain
Single cylinder, 4-Stroke,
Forced Air Cooling, OHV
net power
(KW/3600rpm)
4.1
Max. torque
(N•m/rpm)
12.4/2500
Fuel consumption
(g/kW•h)
≤395
Idle speed
1800±150
Speed Fluctuating
Ratio
≤10%
Transmission Mode
-
Reduction Ratio
-
bore×Stroke (mm)
68×54
Displacement (cc)
196
Compression Ratio
8:3:1
lubricating mode
Sp
The muffler becomes very hot during operation and remains
hot for a while after stopping the engine. be careful not to
touch the muffler while it is hot. Let the engine cool before
storing it indoors.
To prevent fire hazards and to provide adequate ventilation for
stationary equipment applications, keep the engine at least 3
feet (1 m
FUEL VALVE LEVER
The fuel valve opens and closes the passage between the fuel
tank and the carburetor.
The fuel valve lever must be in the On position for the engine to run.
When the engine is not in use, leave the fuel valve lever in the
OFF position to prevent carburetor flooding and to reduce the
possibility of fuel leakage.
THROTTLE LEVER
The th
CHECK bEFORE OpERATIOn
For your safety, and to maximize the service life of your
equipment, it is very important to take a few moments before you
operate the engine to check its condition. be sure to take care
of any problem you find, or have your servicing dealer correct it,
before you operate the engine.
before beginning your preoperation checks, be sure t
To stop the engine in an emergency, simply turn the engine switch
to the OFF position. Under normal conditions, use the following
procedure.
Move the throttle lever to the SlOW position.
Some engine applications use a remotely-mounted throttle
control rather than the engine-mounted throttle lever
shown here.
Turn the engine switch to the OFF position.
Turn t
Some engine applications use a remotely-mounted throttle
control rather than the engine-mounted throttle lever shown
here.
For engine speed recommendations, refer to the instructions
provided with the equipment powered by this engine.
position the throttle lever for the desired engine speed.
THROTTLE LEVER
SLOW
FAST
FUEL VALVE
LEVER
OFF
SETTING ENGINE SPEED
REGUlAR SERVICE pERIOD
performed at every indicated month
or operating hour interval, whichever
comes first.
Each use
First
month or
20 Hrs.
Every 3
months or
50 Hrs.
Every 6
months or
100 Hrs.
Every year
or 300
Hrs.
ITEM
Engine oil
Check level
Change
Air cleaner
Check
Clean
(1)
Replace
Sediment Cup
Clean
Spark plug
Check-Clean
Replace
Spark arrester
(optio