Wisenet SDH-B84045BF Quick Start Manual

• Check your Network Connection • Check your Username and Password • Restart the DVR if you have trouble connecting.   Main Menu > Shutdown > Enter Username & Password > Click “Reboot”   To reset your DVR to factory settings, re ...

• 16CH DVR HDMI VGA LAN 7 5 3 1 8 6 4 2 VIDEO INPUT 12V CAUTION RISK OF ELECTRI SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER S ...

  Accessory category and quantity may differ depending on sales region.   The administrator is recommended to store the remote control carefully in order to initialize it if the password is lost. • SDH-B84045BF USB REC NET PWR SDR-84305 SDC-89445BF 60ft ca ...

Ethernet cable HDMI Cable Remote Control / Remote Control Battery (AAA x 2) Mouse Power splitter (2PCS) Screw x 3EA (per Camera) / Anchor x 3EA (per Camera) Power adaptor for DVR, Power adaptor for 6 cameras, Power adaptor for 4 cameras Printed Material ...

Then connect the BNC video input (yellow) to the video input port on the rear panel. (Repeat Step 1 for the remaining cameras.) 2. Connect the mouse to the USB Port on the front or back panel of the DVR. 3. Depending on the monitor port, ...

Ethernet port on the rear panel. 5. Connect the camera's power supply (red) to the power splitter. Then connect the other end of the power splitter to the power adapter for Cameras and plug in the adapter to a wall outlet. (Repeat Step 5 ...

  Please create a user name and password for your device. Password MUST be 8~13 characters long. When password is 8~9 characters long, it should be with at least a combination of letters, digits and special symbols. If it is 10~13 characters long, it should be with at least a combination of two types of c ...

If the DVR fails to obtain an IP address, refer to the DVR Router Guide. If the problem still cannot be resolved, contact technical support. 3. Date/Time Set the date, time, NTP, DST. ...

new hard drive. Click on "Select" to select the unformatted hard drive. Click on "Format HDD" to pop up the user login window and enter the password to log in. A notice window will indicate "Entire Data Will Be Erased. do You Want To Con ...