Xingtel Xiamen Electronics CL-3239 Manual 

sure that all the parts shown below are available. If any pieces are missing or broken, please get in touch with your dealer. Cover Plate Wall-mount Case Quick Guide Anchors and Screws Doorbell CL-3239 Quick
Guide Wi-Fi
Doorbell Screwdriver X 2 X 1 X 4 X 2 ...

allows you to answer your door with smartphones and tablets anytime anywhere. Layout ...

Remove your existing doorbell from the wall and disconnect the wires, then connect this doorbell to your existing wires. It doesn’t matter which wire connects to which screw. 9-24VAC or 9-36VDC ...

After the connection, install the cover plate to the doorbell. Cover plate ...

1. Choose a proper location for the doorbell. Be sure to consider the average height of visitors. 2. line up the wall-mount case using the provided mounting level, install the wall-mount case and screws with the holes in the wall. 3. Install the doorbell into the wall-mount case. 4. Insert and tighten a screw to finish the installation. ...

1. Download the iCreBell APP from app store. 2. Install iCreBell APP on your smartphones. 3. Lauch the APP. ...

Follow the instructions and start the registration. Note:Password must be at least 8 charaters and contains numbers, uppercase letters and lowercase letters. REGISTER LOG IN iCreBell iCreBell ...

1. iCreBell: Enter the iCreBell homepage. 2. ACOUNT: Holds account information. 3. SUPPORT: Frequently asked questions and the solutions. 4. ABOUT: APP version ...

2. Press to view and change the account information. 1. Press to change the profile picture. ...

3. View and change the account information. View account name Change the nickname Change password Management of payment information View order Log out of your account ...

2. Operate according to the icon. Sound off Volume Full screen Screen shot Record the vedio ...

2. Connect the iCreBell with AC or DC power, then press NEXT. ...

3. Please wait for the white light indicator flashes slowly, then using the small screwdriver to press the RESET button to reset the iCreBell, and when the white light indicator flashes rapidly, press NEXT. Note: Please make sure your mobile device is connected to Wi-fi before this operation. ...

4. Make sure all the devices are on the same network, then press NEXT. 5. Connect to the Wi- Fi network, then press GENERATE. Note: Only support 2.4GHz Wi-Fi. ...

6. Scan the QR code with the doorbell camera, once you heard ‘Ding Dong’, press NEXT. ...