Remotek WU110 Operation & User’s Manual

used to make any derivative such as translation, transformation, or adaptation without permission form Remotek Corporation, as stipulated by the United States Copyright ACT of 1976. FCC Certifications This equipment has been tested and found to comply with the ...

3. Installation Procedure of WU110 ......................................................................6 4. ...

Corp.. This quick start manual will assist you with the installation procedure. The package you have received should contain the following items: � WU110 USB WLAN Adaptor � USB to Mini USB Cable � User manual � CD ROM containing Wireless LAN Management utility and ...

Here are some steps you will perform in establishing your wireless network connection: � Install the Access Point at first. AP is needed in case of infrastructure network mode. � Install the software using the Installation CD-ROM. � Insert the Wireless LAN adaptor (WU110). � Install the driver of USB WLAN adaptor. � Insta ...

Please follow the following steps one by one in order to install the USB WLAN Adaptor successfully. Step 1. Power on your computer and allow Window 95/98/2000 to load fully. Step 2. Be sure that there is no USB adaptor inserted yet. Step 3. Insert the given Installation CD-ROM and then click on the setup.ex. Step 4. Chose ...

Step 6. It takes a few seconds for copying the utility files and then click on Finish to complete the installation Step 7. Message that notifies you to restart your computer may pop up. Select Yes. It will shut down your computer and restart. Step 8. Insert the WU110 - USB WLAN Adaptor ...

The Configuration Utility is a powerful application that helps you to configure the WU-210P and monitor the statistics of the communication. Please keep on mind that this utility can be used to change the following configuration parameters when the cards are active. The Configuration Utility appears as icon on the system tray of Wi ...

� Infrastructure – This mode of operation requires the presence of an 802.11 Access Point. All communication is done via the Access Point. � Ad-Hoc – This mode is for the 802.11 peer-to-peer operation. All communication is done from client to client without the use of an Access Point. The user shoul ...

Data Field: shows the amounts of data packets transmitted or received by the adaptor. And also shows how many data packets are transmitted or received successfully or not. Management Field: shows the amounts of management packets transmitted or received ...