Mustang Sampling Pony Installation Operation & Maintenance

Safety Warnings 3 Product Features 4 Technical Specifications 5 Product Dimensions & Parts 6 Electrical Wiring Diagrams 8 Installation Instructions 9 Operation Instructions 11 Maintenance Instructions 11 ...

Requirements (ANSI/UL 61010-1, 07/12/2004, Ed. 2). • Standard for Safety Electrical Equipment for Measurement, Control , and Laboratory Use; Part 1: General Requirements (CAN/CSA C22.2 No. 61010-1, 07/01/2004, Ed. 2). • Standard ...

existing power supplied by heat trace tube bundle • Molded narrow clam shell design • Steel latching closures • Compatible with Mustang CertiSeries™ line of products • Protects probes from temperature and weather fluctuations • Helps preserve sample integrity • Requires no gas consumption or exter ...

(optional 50 watt self-limiting block heater for warmer climates) Maintains Sample Gas 98ºF (37ºC) Cabinet Construction Hotpressed Glass Fiber Reinforced Polyester Input Supply Voltage Options 120 VAC, 80 Watts 240 VAC, 80 Watts 24 VDC, 25 Watts ...

1 1 1 Item Number Description 1 Insulated Clamshell Enclosure 2 Heat Trace Tube Bundle Connection Location 3 Self-Limiting Block Heater 4 Probe Location 2 2 2 3 3 3 4 4 4 Intertec Enclosure O’Brien Enclosure Stainless Steel Enclosure ...

Front View Front View Side View Side View Side View ...

2. Perform the electrical hook up with de-energized conductors. 3. Verify the unit that you are hooking up to matches voltage wise with the power supply that you are connecting. Damage to the unit can occur if the wrong source ...

12. Mark the set screw and 4 bolt holes on the bottom of the enclosure. 13. Remove the enclosure from the probe house. 14. Place the yellow cover (provided) over the probe to keep dirt out of the housing. 15. Drill 4 holes into the bottom of ...