MTP MTP 3100 Instruction Manual
Text of the manual
TABLE OF CONTENTS
1. Introduction
1
2. Safety and Maintenance Information
1
3. Features / Specifications
2
4. Components in the Box
2
5. Product Layout
3
6. Linking the MTP 3100 – Energy Monitoring System
4
7. Display Information
5
8. History Data Clearance and Factory Reset
7
9. Getting into Setting Mode & Set-up Instructions
9
10. Operation
18
11. Insta
INTRODUCTION / SAFETY
CAUTION! This symbol indicates that the operator must refer to an explanation in the Operating
Instructions to avoid personal injury or damage to the meter.
WARNING! It is recommended you contact a qualified electrician to install the clamps on the
electrical panel. We will not be held responsible for damage as a resu
FEATURES/ SPECIFICATIONS/INCLUDED COMPONENTS IN THE BOX
3. Features
Model Name / Number: MTP-3100
Frequency: 433MHz
Transmission Time: 10s, 15s, 20s (settable)
Transmission Range: ≤70m
Voltage Range: 90V to 600V
Measuring Current: 200A (max)
Accuracy: 0.2A-1A ± 20% / 1A-150A ± 7% / 150A-200A ±15%
Tariff Periods: TOU and NMP
Temperature:
LINKING THE MTP 3100 - ENERGY MONITORING SYSTEM
6. Linking the MTP 3100 – Energy Monitoring System
Transmitter Monitor
Remove plastic tab on Transmitter
(Found on back of transmitter)
Power the Monitor with batteries OR
7. Display Information
Soon after successfully pairing the monitor and transmitter, the LCD screen will automatically return to the
default display.
The LCD screen will depend on user’s tariff choice, TOU (Time of Use) tariff or NMP (Normal Meter Pricing),
the default tariff mode is TOU. See pages 10-12 on how to setup
Default Display Under Normal Working Conditions
The image below is the Default Display, it appears automatically once the pairing is successful. LCD screen also
returns automatically to this display if there is no button operation for a period of time.