MSD Ignition 8963 Installation Instruction
Text of MSD Ignition 8963 Installation Instruction
MSD Digital Shift Light
PN 8963
WARNING: When installing the Shift Light disconnect the battery cables. When disconnecting,
always remove the negative cable first and install it last.
Parts Included:
1 - Shift Light
1 - Mounting Bracket
1 - GMR Pickup, PN 8918
2 - Washers
1 - Brass Screw
1 - Parts Bag
UP
MODE
DOWN
PROGRAMMING
BUTTONS
RED TO SWITCHED 12 VOLTS
GREEN TO TACH SIGNAL
BLACK TO GROUND
PROGRAMMING
CY - Cylinder Count
12, 10, 8, 6, 6 odd, 4, 2, 2 o
MSD IGNITION • www.msdignition.com • (915) 857-5200 • FAX (915) 857-3344
GMR PICKUP INSTALLATION
The MSD GMR pickup can be used with inductive or capacitive ignition types to provide an rpm signal of
30% duration when the ignition coil fires. Two washers are provided with the pickup and must be installed
in one of two positions depending on the type of ignition driving the coil.
Note: For late model applications, it is
MSD IGNITION • www.msdignition.com • (915) 857-5200 • FAX (915) 857-3344 Figure 4 Installing to an Inductive Coil Pack.
BLACK GROUND
RED
GREEN
SWITCHED
12 VOLT
SIGNAL
OUTPUT
GREEN
GMR PICKUP
NOTE: The brass screw must be used for proper operation.
PRIMARY COIL (+) WIRE OR
DIESEL INJECTOR 12 VOLT WIRE
WASHER MUST BE ON TOP OF METAL TAB
METAL TAB
GMR PICKUP
GMR PICKUP
COIL (-) 2
COIL (-) 1
COIL (+)
IGNITION 12 VOLTS
TRIGGER
NOTE: The brass screw must be used for proper operation.
PRIMARY COIL (+) WIRE OR
DIESEL INJECTOR 12 VOLT WIRE
WASHER MUST BE ON TOP OF METAL TAB
METAL TAB
GMR PICKUP
BLACK GROUND
RED
SWITCHED
12 VOLT
SIGNAL
OUTPUT
GMR PICKUP
GREEN
SHIFT LIGHT
BLACK GROUND
UP
MODE
DOWN
RESET
SWITCH
Figure 6 Wiring the 12 Amp Pro Mag.
BLACK GROUND
RED
GREEN
SWITCHED
12 VOLT
SIGNAL
OUTPUT
GMR PICKUP
NOTE: The brass screw must be used for proper operation.
PRIMARY