REXROTH VT-HACD-DPQ Series Technical Data Manual

Digital control electronics for electro-hydraulic injection molding machines Contents Features 1 Ordering code 2 Functional description: Overview 3 Functional description: Injection control 3 Block diagram 6 Technical data 7 Pin assignment of the male multipoint connector 8 Pin assignment of the D-Sub sock ...

Bosch Rexroth AG, RE 30146, edition: 2013-10 Ordering code 01 Digital controller card VT-HACD-DPQ 02 One axis 1 03 Component series 20 … 29 (20 … 29: Unchanged installation and connection dimensions) 2X 04 Basic unit V0 05 With display 1 06 Without bus connection 0 CANopen C DeviceNet D 07 without valve outp ...

3/10 RE 30146, edition: 2013-10, Bosch Rexroth AG Functional description: Injection control Injection profile In order to fill the mold, a velocity profile with up to 10 steps is provided. For every profile step, a maximum pressure/force limit can be set. The injection cylinder is moved in a regulated form using the ...

Bosch Rexroth AG, RE 30146, edition: 2013-10 time, and velocity limitation can be set in the holding pressure profile. Step 1 in the profile is started at the time of transition. Every subsequent step in the holding pressure profile is initiated when the previous step timer has been completed. The velocity limit ...

5/10 RE 30146, edition: 2013-10, Bosch Rexroth AG Functional description: Injection control (continued) In addition, the VT-HACD-DPQ can be configured so that the second valve output is directly controlled via the machine control and not by the internal pressure profile. Applications The VT-HACD-DPQ has been configur ...

d26 z22 z24 z26 z28 f2 b30 b32 d22 d20 U/I U U U/I U U/I U b10 b6 b2 b14 b12 b8 b4 b16 U/I d18 z10 z20 f4 f6 f8 f10 DC DC z30 z32 Ua1 /Ua2 f8 f10 f12 f14 /Ua1 Ua2 /Ua0 f16 Ua0 f18 d6 d8 d10 d12 d14 d16 d4 d2 U/I U d30 U U d32 X2 X1 U U b26 OUT3 U/I U b18 b20 U/I U b22 b24 GND -10V OK +10V CLK + DATA – CLK – DATA + +U 0 V B 2a 2b 1 4 6 7 7 7 8 9 9 9 3 3 ...

7/10 RE 30146, edition: 2013-10, Bosch Rexroth AG Technical data (for applications outside these parameters, please consult us!) Operating voltage UB 24 VDC Upper limit value uB(t)max 30 V Lower limit value uB(t)min 21 V Current consumption Imax 150 mA Fuse IS 4 A time-lag Digital inputs Signal log 0 = 0 to 5 V log 1 ...

Bosch Rexroth AG, RE 30146, edition: 2013-10 Pin assignment of the male multipoint connector Pin assignment of the D-Sub socket on the front panel Pin Row z Row b Row d Row f 2 n.c. AI3+: Internal mold pressure 1) DI1: Back pressure DO7: Pressure 4 n.c. AI3–: Internal mold pressure 1) DI2: Auto SSI clock+ 6 n. ...

9/10 RE 30146, edition: 2013-10, Bosch Rexroth AG Dimensions (dimensions in mm) ...

10/10 VT-HACD-DPQ | Digital control electronics Bosch Rexroth AG Hydraulics Zum Eisengießer 1 97816 Lohr am Main, Germany Phone +49 (0) 93 52 / 18-0 [email protected] www.boschrexroth.de © This document, as well as the data, specifi cations and other information set forth in it, are the exclusiv ...