Rev-A-Shelf 432 Series Installation Instructions

Pull-Out Instructions Step 1. Measure scribe rail thickness and length per your specific cabinetry. See fig 1 Step 2. Install scribe rails to filler pull-outs using small finish nails or brads. See fig 2 Note: align scribe rails with front edge of filler pull-out. Align scribe rail to upper section of base cabinet lower mounting strap or ...

inch holes 3/8 inch down from top of cabinet and also 27-3/4” down from top of cabinet. (See fig 4a–d). Repeat with other adjacent cabinet. Step 4. Mount filler cabinet pull-out to adjacent cabinet 1. See Fig. 5a–b Step 6. Remove front mounting strap. See Fig 7a–b Step 7. Attach face frame and onlays (not prov ...