Audiovox FPE2608 Owner's Manual

PLV36260CS10 / AUDIOVOX I/B 811-362691W080 SIZE : 148 X 210MM MATERIAL : 80g WOODSFREE PAPER OWNER'S MANUAL FPE2608 FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994 OR VISIT US AT WWW. AUDIOVOX.COM 128-8307 Printed in China 811-362691W080 ...

SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVI ...

IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat. 9) Do not defect the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third groundin ...

CONTENTS SAFETY PRECAUTIONS .................................................................................................................... 1 IMPORTANT SAFETY INSTRUCTIONS ........................................................................................... 2 CONTENTS ......................................................................................................................................... 3 ACCESSORIES .................................................................................................................................. 4 GETTING STARTED ......................................................................... ...

ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ................................................................................................. x 1 GETTING STARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor located on the unit. • When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 16 feet (5 meters). TO INSTALL BATTERIES 1. Open the battery door. 2. Insert 2 “AAA” batteries. BATTERY REPLACEMENT When the batt ...

CONTROL REFERENCE GUIDE REMOTE CONTROL 1. STANDBY / ON button Press to turn ON the unit or put it in STANDBY (OFF) mode. 2. TV button Press to switch to TV mode. AV button Press to switch to source connected to AV 1 / AV 2 (composite) inputs. HD button Press to switch to source connected to YUV (component) inputs and HDMI 1 / HDMI 2 inputs. DISPLAY button Press to change disc status information displayed on the screen. 3. Number (0 - 9) buttons 4. • [dot] button Use to enter digital sub-channels. (i.e. 11.3 or 12.7) 5. MENU button Press to display the on-screen TV menu. 6. VOLUME (- / +) buttons Press to adjust the volume level. 7. CURSOR ( , ...

CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 1. STD.BY / ON button Turns the unit on and off. 2. MENU button Enters the on-screen TV menu. 3. FUNCTION button Selects TV / AV 1 / AV 2 / YUV in / HDMI 1 / HDMI 2 / PC in. 4. CH buttons Confirms selections on the TV menu screen and changes the TV channels. 5. - VOL + controls Adjusts the volume level. 6. Removable stand 7. Color LCD screen 8. Remote sensor Receives the remote control signal. Standby indicator 9. Speaker FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM 6 ...

CONTROL REFERENCE GUIDE REAR VIEW 10. AUDIO IN (Left/Right) jacks (AV IN 2) 11. VIDEO IN jack (AV IN 2) 12. VIDEO IN jack (AV IN 1) 13. Headphones jack 14. TV ANTENNA terminal 15. AUDIO IN (Left / Right) jacks (AV IN 1) 16. S-VIDEO IN jack (AV IN 1) 17. AUDIO IN (Left / Right) jacks (YUV IN) 18. VIDEO / AUDIO OUT (Left / Right) jacks (AV OUT) 19. PC IN MONITOR / VGA jack 20. AC Power Cord 21. HDMI jacks (HDMI IN 1 / HDMI IN 2) 22. PC IN AUDIO jack 23. Component Video input (Y / PB / PR) jacks (YUV IN) 12 13 14 15 16 17 18 19 25 24 23 22 21 20 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM 7 ...

CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system CONNECTING AN A/V DEVICE To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc. Connecting to a VCR / Camcorder / Satellite System / Cable Connect the AUDIO and S-VIDEO cable (not included) as shown: Make sure you connect the cable from the other equipment (AUDIO OUT and S-VIDEO OUT) to this unit AV IN 1 (AUDIO IN and S- VIDEO IN). NOTE Please refer to the user manual for the other equi ...

CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT To connect A/V devices such as a VCR, video game system or camcorder: Connecting to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown: Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit AV IN 1 (AUDIO and VIDEO IN) or AV IN 2 (AUDIO and VIDEO IN). NOTE Please refer to the user manual for the other equipment for more information. To AUDIO / VIDEO IN jacks (AV IN 1) To AUDIO / VIDEO OUT jacks CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO INPUT To connect A/V devices such as ...

CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). NOTE When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can support DVD players up to a ma ...

CONNECTIONS CONNECTING HDMI To HDMI OUT jack HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays. HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi- channel surround-sound audio. HDMI features include ...

CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STD. BY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES • TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET, THEN FULLY INSERT. • When the AC power cord is plugged in, the unit is not completely disconnected from the main power, even when the power is turned off. • Be sure the AC power cord is disconnected and all functions are off before making connections. • Make sure that all the components are connected correctly. • When you are not going to use the unit for a long ...

INSTALLATION REMOVING THE BASE STAND WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the rear of the unit at anytime because the screen could crack. MOUNTING ON THE WALL This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 7 7/8” x 3 7/8” (200mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions included with the mounting kit. NOTE Remove the bas ...

TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video. 3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, Tint, Sharpness or Color Temperature). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. Picture Mode : Select from preset screen display settings to match the type of sh ...

AUDIO MENU 1. Press the MENU button. 2. Use the or button to select Audio, then press the ENTER or button to go into the Audio settings. 3. Use the or button to select the options (Balance, Bass, Treble, Virtual Surround, Reverb or Sound mode). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. NOTE Experiment with different sound settings until you f ...

TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV. Press the ENTER or button to go into the TV settings. 3. Use the or button to select the options (Tuner Mode, Auto Scan, Auto Scan Add CH, Channel Skip, MTS or Audio Language). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. Tuner Mode : Antenna (over-the-air br ...

SETUP MENU 1. Press the MENU button. 2. Use the or button to select Setup. Press the ENTER or button to go into the Setup settings. 3. Use the or button to select the options (OSD Language, Time Setup, Caption or Restore setting). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. Time Zone :Select the time zone from Eastern Time / Indiana / Central T ...

Restore Setting If you reset the TV to the factory settings, all your present settings on Video & Audio will be erased and replaced by the factory’s default settings. However, picture settings in PC mode and Parental settings will not be erased. Caption Setting Analog Closed Caption : Select the analog closed caption or turn it off. Digital Closed Caption : Select the digital closed caption or turn it off. Digital Caption Style : Select as Broadcaster to use the default digital caption style of the broadcaster. Select Custom to activate the caption style items and set you preferred detailed settings. NOTE This function only works on ATSC progr ...

Rating Enable : Select On to edit the following parental items. Select Off to disable parental control. Open V-Chip : Reads the ratings from ATSC TV programs if there is rating information broadcasted, and denies the channel when its rating is higher than the ratings you pre-set. Parental Control Setting 1. Use the or button to select various Parental settings. Press the ENTER or button to go into the detailed settings. 2. Use the , , and buttons to move among the rating levels. Press the ENTER button to change the mode between Blocked and Allowed. 3. Press the EXIT button to return to the previous menu. 4. Repeat steps 1 - 3 to adjust othe ...