Audiovox FPE2608DV Owner's Manual

WITH BUILT-IN DVD PLAYER PLV31260CS10 / AUDIOVOX I/B 811-312691W070 SIZE : 148 X 210MM MATERIAL : 80g WOODSFREE PAPER OWNER'S MANUAL FPE2608DV FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994 OR VISIT US AT WWW. AUDIOVOX.COM 128-8305 Printed in China 811-312691W070 ...

SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVI ...

IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat. 9) Do not defect the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third groundin ...

CONTENTS SAFETY PRECAUTIONS ................................ 1 IMPORTANT SAFETY INSTRUCTIONS ............................................................................. 2 MAINTENANCE ................................................ 2 CONTENTS ....................................................... 3 DISC FORMATS .............................................. 4 ACCESSORIES ................................................ 5 GETTING STARTED ......................................... 5 CONTROL REFERENCE GUIDE ................. 6-9 CONNECTIONS ........................................ 10-14 Connecting a TV Antenna / Cable / Satellite ................. ...

DISC FORMATS NOTES ON COPYRIGHT It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public or rent copyrighted material without permission. Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448 and 6,516,132 licensed for limited viewing uses only. DVDs are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision ...

ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ................................................................................................. x 1 GETTING STARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor located on the unit. • When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 16 feet (5 meters). TO INSTALL BATTERIES 1. Open the battery door. 2. Insert 2 “AAA” batteries. BATTERY REPLACEMENT When the batt ...

CONTROL REFERENCE GUIDE REMOTE CONTROL 1. STANDBY / ON button Press to turn ON the unit or put it in STANDBY (OFF) mode. 2. TV button Press to switch to TV mode. DVD button Press to switch to DVD mode. AV button Press to switch to source connected to AV1 / AV2 (composite) input. HD button Press to switch to source connected to YUV in / HDMI 1 / HDMI 2 (component) inputs. 3. Number (0 - 9) buttons 4. • [dot] button Use to enter digital sub-channels. (i.e. 11.3 or 12.7) 5. MENU button Press to display the on-screen TV menu. 6. VOLUME (- / +) buttons Press to adjust the volume level. 7. CURSOR ( , , , ) buttons Press to highlight selections on a ...

CONTROL REFERENCE GUIDE REMOTE CONTROL 17. FUNCTION button Press to switch between TV / AV 1 / AV 2 / YUV in / DVD / HDMI 1 / HDMI 2 / PC in. 18. LAST CH button Press to switch repeatedly between the last two channels displayed. 19. MUTE button Press to turn off the sound. 20. CH / CH buttons Press / to change the channels. 21. NEXT button Press to select the next title, chapter or track on a disc. 22. button Press to stop playing a disc. Press to go to a folder list of picture file list. PLAY button Press to start and resume playback of a disc. PAUSE button Press to pause playback and single frame advance. 23. AUDIO button Press to s ...

CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 1. STD.BY / ON button Turns the unit on and off. 2. MENU button Enters the on-screen TV menu. 3. FUNCTION button Selects TV / AV 1 / AV 2 / YUV in / DVD / HDMI 1 / HDMI 2 / PC in. 4. CH buttons Confirms selections on the TV menu screen and changes the TV channels. 5. - VOL + controls Adjusts the volume level. 6. Removable stand 7. Color LCD screen 8. PLAY button Starts and resumes playback of a disc. STOP button Stops playing a disc. PAUSE button Pauses playback and single frame advance. PREV button Goes back to previous chapters / tracks. Performs fast reverse playback. NEXT button Advances cha ...

CONTROL REFERENCE GUIDE REAR VIEW 12. AUDIO IN (Left/Right) jacks (AV IN 2) 13. VIDEO IN jack (AV IN 2) 14. VIDEO IN jack (AV IN 1) 15. Headphones jack 16. TV ANTENNA terminal 17. AUDIO IN (Left / Right) jacks (AV IN 1) 18. S-VIDEO IN jack (AV IN 1) 19. AUDIO IN (Left / Right) jacks (YUV IN) 20. VIDEO / AUDIO OUT (Left / Right) jacks (AV OUT) 21. PC IN MONITOR / VGA jack 22. AC Power Cord 23. HDMI jacks (HDMI IN 1 / HDMI IN 2) 24. PC IN AUDIO jack 25. Component Video input (Y / PB / PR) jacks (YUV IN) 12 13 14 15 16 17 18 19 25 24 23 22 21 20 FPE2608DV_ib_eng_1-16.pmd 1/15/2008, 12:42 PM 9 ...

CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system CONNECTING AN A/V DEVICE To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc. Connecting to a VCR / Camcorder / Satellite System / Cable Connect the AUDIO and S-VIDEO cable (not included) as shown: Make sure you connect the cable from the other equipment (AUDIO OUT and S-VIDEO OUT) to this unit AV IN 1 (AUDIO IN and S- VIDEO IN). NOTE Please refer to the user manual for the other equ ...

CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT To connect A/V devices such as a VCR, video game system or camcorder: Connecting to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown: Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit AV IN 1 (AUDIO and VIDEO IN) or AV IN 2 (AUDIO and VIDEO IN). NOTE Please refer to the user manual for the other equipment for more information. To AUDIO / VIDEO IN jacks (AV IN 1) To AUDIO / VIDEO OUT jacks CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO INPUT To connect A/V devices such a ...

CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). NOTE When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can support DVD players up to a ma ...

CONNECTIONS CONNECTING HDMI To HDMI OUT jack HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays. HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi- channel surround-sound audio. HDMI features include ...

CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STD. BY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES • TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET, THEN FULLY INSERT. • When the AC power cord is plugged in, the unit is not completely disconnected from the main power, even when the power is turned off. • Be sure the AC power cord is disconnected and all functions are off before making connections. • Make sure that all the components are connected correctly. • When you are not going to use the unit for a long ...

INSTALLATION REMOVING THE BASE STAND WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the rear of the unit at anytime because the screen could crack. MOUNTING ON THE WALL This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 7 7/8” x 3 7/8” (200mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions included with the mounting kit. NOTE Remove the bas ...

SOUND SYSTEM DOLBY DIGITAL (FOR DVD) Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically recognizes DVDs that have been recorded with Dolby Digital. Not all Dolby Digital sources are recorded with 6 channels. Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo on your unit. Manufacturer under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. UNIT OPERATION TURNING THE UNIT ON When the AC power cord is connected, press the STD. BY/ON button to turn it on. Press the FUNCTION button to select des ...

TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video. 3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, Tint, Sharpness or Color Temperature). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. Picture Mode : Select from preset screen display settings to match the type of sh ...

AUDIO MENU 1. Press the MENU button. 2. Use the or button to select Audio, then press the ENTER or button to go into the Audio settings. 3. Use the or button to select the options (Balance, Bass, Treble, Virtual Surround, Reverb or Sound mode). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. NOTE Experiment with different sound settings until you f ...

TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV. Press the ENTER or button to go into the TV settings. 3. Use the or button to select the options (Tuner Mode, Auto Scan, Auto Scan Add CH, Channel Skip, MTS or Audio Language). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. Tuner Mode : Antenna (over-the-air br ...