Audiovox FPE2706 Operating Manual

keep this manual for future reference. The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. Menu items that are not selectable are grayed out. FOR ASSISTANCE CALL 1-800-619-3848 OR VISIT US AT WWW.AUDIOVOX.COM. LCD Color TV with ATSC Tuner Operating Manual FPE2706 1287615 ...

2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug h ...

completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the unit or described in the operating instructions or service manual. WARNING To guard against injury, the following basic safety precautions should be observed in the installation, use and servicing of the unit. Power Sources This unit should be operated only from the type of power source indicated on the information label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. ...

For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Entering of objects and liquids Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an ob ...

4 Important Information ..............................................................................................................................1 Important Safeguards...............................................................................................................................2 Table of Contents......................................................................................................................................4 Introducing the TV ...................................................................................................................................6 Remove the TV from the Box.......... ...

5 Adjusting MENU Options.........................................................................................................................27 Picture Control................................................................................................................................27 Accessing Picture Menu ...................................................................................................................27 Selecting Picture Options..................................................................................................................27 Adjusting Picture Settings....................................... ...

Remove the TV from the Box STOP! To safely remove the television from the box It’s best to use 2 people to remove the television for stability. 1. Remove cardboard holders from the box. 2. Remove the cardboard; however, keep the wrapping on the television to protect it while moving. 3. Lift onto installation location as the diagram illustrates. Installing the TV Select a steady platform with good ventilation to place the TV. =Keep enough space above and behind the Display. = = = Be sure to take measures to prevent the TV from toppling over and causing injury. The TV should be installed near an easily accessible power outlet. To pre ...

Attach the Speaker to the Display Remove the Stand Cautions: 1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful installation. 2. Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. 3. Disconnect the AC power cord firstly. Screw the Speaker and the Fixed board to the unit using the supplied screws and tighten securely, then install the two Connecting covers as Connect the speaker audio cable between the speaker terminals on the unit and th ...

TV Controls and Connectors Control Panel INPUT MENU VOL+ VOL- CH+ CH- Item Description Power Indicator Remote Sensor Receives IR signals from the remote control. 1 3 5 4 6 7 2 1 2 Press to scan through channels. In menu operations, these buttons serve as down/up buttons. CH-/CH+ 3 Press to adjust the volume. In menu operations, these buttons serve as left/right buttons. VOL-/VOL+ 4 MENU* 5 . To access the Menu main page. INPUT 7 To display the INPUT source list or to quickly select input source. POWER 6 Turn the unit on or off. 8 In normal viewing, press the MENU button first time to access the Menu main page. * In Menu operations, t ...

TV Controls and Connectors Connectors S- VIDEO D -Su b/D VI AUD IO IN PUT HDM I INP UT COMPONENT AV Pr Pr Pb Pb Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D-S ub IN PUT PC/ DTV I NPU T ( ) RF RS-232 R VIDEO L USB UPGRADE PORT ( ) VCR(OUTPUT) DIG ITAL AUD IO OUT COA XIA L S- VIDEO D -Sub/DVI AUDIO INPUT HDMI INPUT COMPONENT AV Pr Pr Pb Pb Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D-Sub INPUT PC/DTV INPUT ( ) RF RS-232 R VIDEO L USB UPGRADE PORT ( ) VCR(OUTPUT) DIGITAL AUDIO OUT COAXIAL TV Right Side 1 2 3 4 5 6 7 8 9 10 11 12 Item Description HDMI IN 1 HDMI (High-Definition Multimedia Interface) prov ...

Basic Connections Overview To display clear crisp pictures, you must connect your TV correctly and choose the correct display format. It is strongly recommended to connect the cable and antenna input using a 75-ohm coaxial cable to receive optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away as possible from the TV. The way in which you connect your TV will vary, depending on how your home receives a signal (antenna and satellite; cable and cable box). Do not us ...

Basic Connections Connecting Cable Box For best results, use this connection if you have a cable system and your cable company scrambles some channels, such as premium channels or all channels (which requires you to use a cable box). Connect the CATV cable to the cable box’s input jack. Then use a coaxial cable to connect the cable box’s output jack to the TV’s RF input jack. Cable box OUT IN CATV cable Coaxial Cable Be sure to choose [Cable] before you start Auto Program. See chapter [Getting Start] for details. Connecting Digital Cable Box Connect the RF coaxial cable from the CATV to the input of the digital cable box. Use a ...

Basic Connections Connecting Satellite Receiver Connecting Digital Satellite Receiver Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Use AV cables to connect the satellite receiver’s AUDIO and VIDEO OUT jacks to the TV’s AUDIO and VIDEO IN jacks. Connect the RF coaxial cable from the satellite dish to the input of the digital satellite receiver. Use a component video cable to connect the YPbPr jacks of your digital satellite receiver to the TV’s component jacks. Component video connection is necessary to view digital broadcastings in 1080i, 720p, 480i and 480p. This TV displays most format ...

Using External Equipment Introduction You can connect many types of external equipment to your TV, like a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console and camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the Display. Notes and Cautions: Connecting the TV =Disconnect all power sources before making any connections. =Carefully check the terminals for position and type before making any connect ...

Using External Equipment Connecting the TV You can use the TV's Coaxial Digital Audio OUT jack to connect a digital audio device, such as an audio amplifier. Use an coaxial audio cable to connect the TV’s Coaxial Digital Audio OUT jack to the device’s Coaxial Digital Audio IN jack. Equipment with Coaxial Digital Audio Equipment with DVI Connection Audio cable Equipment with DVI output HDMI-to-DVI cable or adapter If you are connecting equipment with DVI connector to this ...

Connecting the TV Connecting a VCR for Playing Back Use AV cables to connect the VCR’s AV output jacks to the TV’s AV input jacks. If your VCRs have S-VIDEO jacks, for best picture quality, use an S-VIDEO connection instead of the video cable (yellow) on your combined A/V cable. Use a S-VIDEO cable to connect the VCR’s S-VIDEO OUT jack to the TV’s S- VIDEO IN jack. S-VIDEO does not provide audio, so audio cables must be connected to provide sound. VCR AV cable S- VIDEO D -Sub/DVI AUDIO INPUT HDMI INPUT COMPONENT AV Pr Pr Pb Pb Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D-Sub INPUT PC/DTV INPUT ( ...

Connecting the TV Connecting a DVD Player with Component Video Connectors Use a component video cable to connect the DVD player’s YPbPr jacks to the TV’s YPbPr jacks. Use an audio cable to connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks. Be sure to use the same row of inputs that you used for the video connection. S- VIDEO D -Sub/DVI AUDIO INPUT HDMI INPUT COMPONENT AV Pr Pr Pb Pb Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D-Sub INPUT PC/DTV INPUT ( ) RF RS-232 TV Right Side The YPbPr jacks on your DVD player are sometimes labeled YCbCr, or Y, B-Y and R-Y. If so, connect t ...

Connecting the TV Connecting a PC If you connect your PC to the TV, you can watch your personal computer’s display on the TV. When your PC is connected to the TV with the D-Sub cable and audio cable, you can view and listen to the PC’s video and audio output on the TV. D-Sub cable (analog RGB) To monitor port (15-pin D-Sub) To audio output jack S- VIDEO D -Sub/DVI AUDIO INPUT HDMI INPUT COMPONENT AV Pr Pr Pb Pb Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D-Sub INPUT PC/DTV INPUT ( ) RF RS-232 TV Right Side Audio cable (stereo mini plugs) Connecting a Camcorder or “PlayStation” Use an AV cable to connect ...

Connecting the TV Connecting a Second TV or Monitor The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV’s VCR output jacks. See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. R VIDEO L USB UPGRADE PORT ( ) VCR(OUTPUT) DIGITAL AUDIO OUT COAXIAL TV Left Side Connecting Headphones Insert the plug of the headphone into the TV’s Headphone jack. When using headphones, adjust the headphone volume so as to avoid excessive levels, as hearing damage may result. If your headphones do ...

Insert Batteries into the Remote Control Insert two size AA batteries by matching the and on the batteries to the diagram inside the battery compartment. 1 2 Precaution on battery use Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. =Place batteries with their terminals corresponding to the (+) and (–) indications. =Different types of batteries have different characteristics. Do not mix batteries of different types. =Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries ...