Audiovox NAV102 Installation And Operation Manual
Text of Audiovox NAV102 Installation And Operation Manual
Installation and Operation Manual
Manual de Instruccionnes de
Instalaci6n y Operaci6n
Instructions d'installation
et d'operation
'r~I~
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner's
manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to
use all the features of your new Jensen NAV102 navigation system for maximum enjoyment.
Introduction
1
Safety Information
2
Basic Operation
3
Selecting a Destination
7
Selecting a Point Of Interest
12
Navigating
16
Managing Favorites
18
Setup Menu
Audiovox NAV102 NAV102 with NavMate
~
INTRODUCTION
We hope that you enjoy using your new Jensen NAV102 navigation system. This manual is
designed to help you get the most out of your system. This navigation system leads you
straight to your destination. You can navigate and plan your route with an easy-to-use and
intuitive interface, plan your trip to suit your personal preferences and interests, and find and
save (bookmark) interesting destinations before you begin your
NAV102 with NavMate SAFETY INFORMATION
User Agreement
When the Jensen NAV102 is first turned on, you will see the following message, warning you to
operate your navigation system appropriately:
You must agree to the above notice before operating the NAV102. Touch the bar labeled
"Press to accept." to proceed to the Main Menu.
Driver Safety Rules
The following safety rules must be followed to prevent accidents that can result in injury or
death to yo
NAV102 with NavMate ~
BASIC OPERATION
Head Unit Button Functions
Accessing the Navigation Software
Press the SRC button and select the NAV icon to access navigation mode.
Selecting / Listening to a Source while Navigating
While navigating, other sources may be selected and listened to such as AM-FM Tuner, CD,
etc. To listen to another source while navigating, press the SRC button and then select a
source from the Source Menu. Navigation voice prompts will
NAV102 with NavMate Table 2: Common Command Buttons
NOTE: On the keyboard screen, the "SPACE" button is located in the bottom center of
the screen. Press the Space button to complete the search for entries with more than
one word. For example, to locate Lake Mary, enter "Lake_" and then the "M" will become
available for selection.
Selecting from Lists
You will often find it necessary to select items from a list. When viewing a list, the marked item
appea
NAV102 with NavMate ~
Go To...: Choose your destination by searching for an address, choosing an entry from
the POI (point of interest) directory, selecting a location from the map, or by choosing a
destination from a saved list of recently visited locations or favorites (see "Selecting a
Destination" on page 7).
Setup: Configure your navigation to suit your needs. Define general settings (e.g. time,
language, or system of measurement), configure your map
NAV102 with NavMate 2D/3D/SpHtScreen
During navigation or map browsing, you can click the. button to switch between 2D
(default), 3D and Split Screen map views.
DVD Installation
See separate insert for DVD installation.
Trip Computer
The Trip Computer provides information about your vehicle speed, trip related timing,
elevation, odometer and clock.
Press to View Detailed Readings
6
Press the "i" icon to view detailed readings for each field.
Press the bl
NAV102 with NavMate ~
IIIIIL
SELECTING A DESTINATION
There are five different ways to find and choose a destination. Some methods allow you to
select from a list using the arrow keys, while others allow you to search using an on-screen
keyboard.
NOTE: Ifa route is in progress when you exit the NAV102 system, the unit will prompt
"Do you want to resume guidance?" when you resume operation. Press the green
check mark to resume or the "X" to cancel and go to
NAV102 with NavMate 4.
Press the [Ltr_'_~-,~=-'_~l button to select the street number and access the "Start Route"
screen.
Point of Interest
The POI finder allows you to quickly find points of interest, like gas stations and restaurants, in
a database of millions of POI's, These places can be near your current position or near a
selected State or Province, See "Selecting a Point Of Interest" on page 12 for information
about locating a Point of Interest.
NAV102 with NavMate ~
2.
From the "Go To..." menu, select History.
3.
...l~'-
Press the l1;li button to view and select the address nearest the crosshair, or press
Quick POI to locate a POI in the visible map area.
1.
From the "Main Menu", select Go To....
4.
Touch the address to view the "Set" screen, where you can choose to set the address as
your destination, your home address, or your vehicle position or choose to add this
location to your address book
NAV102 with NavMate 4.
Press to select a recent destination from the "History" list and view the "Start Route"
screen.
Press the blue AI Varrow buttons or use the scroll bar on the right side of the screen
to navigate the list.
Use the0
I8
buttons to move through the list page by page.
Press the Garbage Can icon to delete the highlighted item.
5.
Continue navigation as instructed in the previous sections.
NOTE: The "History" list stores the last 15 addre
NAV102 with NavMate ~
1.
2.
3.
4.
5.
6.
7.
~~
Press the
~.
button to view the "Main Menu" (if not already doing so).
Press Go To...
Press Favorites.
Press Trail Book to view a list of existing trails.
Press the Trail you would like to follow and a list of trail points will be displayed.
You can press to choose any Trail point as the stating point. Once a point is selected, the
system will display a red dotted line from your current location to the starting
NAV102 with NavMate SELECTING A POINT OF INTEREST
,
j button to
1button to select the City and return to the "Point of Interest" menu.
Press the [r· ;~
~p;1
Use the I~ II':,.J buttons to move through the list page by page.
I""
2.
Click an item on the list to select that category OR press the'
~
access the keyboard and enter a category directly.
City
1.
Press the City button to enter the city in which you would like to find a point of interest.
2.
Begin
NAV102 with NavMate ~
Press the blue 1\ / V arrow buttons or use the scroll bar on the right side of the screen
to navigate the list.
Use the8 /8
buttons to move through the list page by page.
3.
Press to select a POI destination and access the "Start Route" screen.
Browsing POI Destinations
Press the. button to display a menu of six common POI categories from which you
can choose.
Q
~/
...--.
Parking
~/
Hospital
Restaurant
Lot
~.
rI
~Q
Gasoline
".~
Hotel
NAV102 with NavMate 2.
Press ther' I~
screen.
1button to save the Category name and go to the "Setup Display"
Edit Category
1.
To edit an existing My POI Category, press the following sequences of menu buttons: Go
To... > Favorites> Edit Favorites> My POI> Edit Category from the "Main Menu".
3.
Determine map indicators and settings for your new Category.
Set Icons Shown: Press to select the marker that will represent POI destinations in
your new Category
NAV102 with NavMate ~
I
r
II R •
[Ill'
Tn
2.
Refer to information in the section titled "Selecting a Destination" on page 7 to locate a
destination. After entering a destination address, the "Edit" screen appears.
3.
Add additional information about your POI:
Press the address box to edit name of your POI.
Press the Category box to select a category for your new POI.
Press the phone box, to use the on-screen keypad to enter the phone number for the
new P
NAV102 with NavMate _I
NAVIGATING
L
£1
AadL
L
4
db
UiL
The powerful navigation capabilities of your NAV1 02 will guide you along the shortest or
quickest route from A to B - with voice commands and in 3D (optional).
To begin navigation, select a location using the Go To... feature (see "Selecting a Destination"
on page 7).
Route Calculation and Guidance
After choosing a destination, the system will determine a route based on your preferences in
the "Set
NAV102 with NavMate , ,
~
II
DlIEIl
1F
Ii!'"
III! 1£
UIIF
acaRi!!!
11_
1.
~
....•
.--
To add a Detour while navigating, press the
....,.", button to return to the "Main Menu"
and then press Edit Route.
Arriving at your Destination
When you are near your destination, the destination is indicated by a checkered flag symbol. A
voice prompt will announce that you are approaching your destination.
2.
Press Detour to view the "Detour" screen.
Detour Distance