Rion NL-42 Interface Manual
Text of Rion NL-42 Interface Manual
3-20-41 Higashimotomachi, Kokubunji, Tokyo 185-8533, Japan
http://www.rion.co.jp/english/
SERIAL INTERFACE MANUAL
Sound Level Meter
NL-42 / NL-52
Organization of the NL-42/NL-52 documentation
Documentation for the Sound Level Meter NL-42/NL-52 comes in three
parts, as listed below.
Instruction Manual
Describes operating procedures for the NL-42/NL-52, connection and use
of peripheral equipment such as a level recorder and printer, and use of the
SD memory card.
Serial Interface Manual (this document)
Describes communication with a computer, using the serial interface built
into the NL-42/NL-52.
Organization of This Manual
This manual describes how to use the serial interface built into the NL-42/
NL-52. Besides the RS-232C serial interface standard, the unit also supports
USB. However, correct operation in combination with other USB devices is
not assured. If possible, you should avoid connecting other USB devices at
the same time.
The manual is divided into four chapters.
Chapter 1 covers points that are common to the RS-232C and USB interfa
Organization of the NL-42/NL-52 documentation .......................... i
Organization of This Manual ........................................................ iii
Chapter 1 General Information ......................................................1
Outline ............................................................................................2
Communication Cutoff ....................................................................3
Sleep
Chapter 4 Commands ....................................................................21
Command ......................................................................................22
Command types .......................................................................22
Command format .....................................................................22
Echo back ................................................................................24
Res
Chapter 1 General Information
Contents
Outline ............................................................................................2
Communication Cutoff ...................................................................3
Sleep mode ...............................................................................3
ECO setting ...............................................................................3
Power off ..............................
The NL-42/NL-52 incorporate a serial interface. This interface allows the use of a
computer to make measurement parameter settings and to control the measurement.
It is also possible to send measurement results (current results as well as data stored
in the memory of the sound level meter) to the computer for further processing.
Standard terminal software (Hyper Terminal, etc.) can also be used as communica-
tion client.