Satel INT-SK Quick Installation Manual
Text of the manual
Quick installation guide
Full manual is available on www.satel.eu
The alarm system should be installed by qualified personnel.
Disconnect power before making any electrical connections.
The INT-SK partition keypad offers control of one partition in the alarm system and provides
access control features. The devic
10. Connect the power wires to the +12V and COM terminals. The keypad may be powered
directly from the control panel, from an expander with power supply or from a power
supply unit.
11. Close the keypad enclosure.
12. Power on the alarm system.
13. Start the identification function in the control panel (see the control panel installer
manual).
