TEC.LA Shield DOS Getting Started

. Getting Started getting started Getting Started getting started Getting started Green Android Blue App Control Pink iOS 4-Way Aqua Mouse Keys Orange Battery Status The colour of the blinking indicates the current mode. You can change the mode as described in “Connecting the Tecla Shield DOS” section, but first, you will want to ...

Shield DOS Turn on the Tecla Shield DOS Connect your Tecla Shield Select the Tecla Shield DOS mode according the target device Slide the On/Off switch to ON to power up the Tecla Shield; the Status Indicator Light will start to blink. Please proceed to the specific mode section below for detailed instructions on how to establish a conn ...

Getting started The Hardware The Hardware Front View charging indicator light status indicator light Understanding the Status Indicator Light Understanding the Charging Indicator Light Off Blinking (once per second) Blinking rapidly (four times per second) Intermittent Orange Pulses (between blinking and fading in / out) Fading In / O ...

The Tecla Shield has two dual switch 1/8” or 3.5mm stereo ports labelled 1 and 2. Use an AC adapter with 2.1mm center-positive barrel plug (9–24V) to charge your Tecla Shield. (Optional) Use a USB cable to connect the Shield to a USB port or wall adapter to charge. (USB cable included) Turn your Shield off when not in use to conserve the ...

Configuration Buttons (- and +) • Select a mode prior to connecting with a host device, or • Once connected, modify (increase/decrease) the auto-scanning rate in supported modes. tecla shield user guide getting started The Hardware configuration buttons ...