Techne TC-PLUS Operator's Manual

File Specifications

Brand: Techne
Category: Laboratory Equipment
Model: TC-PLUS (Operator's Manual), prLpw6g6nVysg
File Type: PDF
File Size: —
Pages: 46 pages

Download Document

Get a high-quality, printable PDF version of this manual for offline use.

Download PDF Manual (46 pages)

⚠️ Download Safety: This PDF is completely safe to download (last scan date: 04/08/2026).

Read Online

Read the Techne TC-PLUS Operator's Manual online using the built-in PDF viewer.

Key Pages of Document

SAFETY AND INSTALLATION

6 English 6 Français 8 Deutsch 10 Italiano 12 Español 14 CONTACT INFORMATION 16 SPECIFICATION 17 INSTALLATION 18 TECHNE WORKBENCH 20 Home Screen 20 Menu Bar Options 20 Settings 21 Instruments 25 Programs 27 Library 33 About 38 APPENDIX 39 Template Programs 39 Incremented/Decremented Time and Temperature 39 Gradient 40 REMOVING AND EXCHANGING BLOCKS 41 FAQs 42 TECHNICAL SUPPOR ...

The TC-PLUS Satellite is an advanced gradient thermal cycler designed to accurately and rapidly

control the temperatures of samples between 0ºC (or 20°C below ambient) and 100°C. It has many scientific applications including PCR1, reverse transcription, ligation and sequencing. It has user- interchangeable blocks to allow for most commonly used consumables including 0.2ml x 96 well plates and 0.2ml tubes, 0.5ml tubes and 384 well plates. ...

Before using the TC-PLUS Satellite please make sure you have read this manual carefully. If there is

any doubt relating to the proper use of this equipment, the staff at Bibby Scientific Ltd. or your supplier will be happy to assist you. UNPACKING When unpacking the unit please ensure that the following have been removed from the packaging: • TC-PLUS Satellite with block • Mains cables (UK, EU and US) • USB cable • Operator’s manual ...

Please read all the information in this manual before using the TC-PLUS Satellite.

WARNING HIGH TEMPERATURES ARE DANGEROUS: they can cause serious burns to operators and ignite combustible material. Users should be aware of the following potential hazards: • USE CARE AND WEAR PROTECTIVE GLOVES TO PROTECT HANDS • DO NOT use combustible substances near hot objects • DO NOT operate the instrument in the vicinity of inflammable liqui ...

The TC-PLUS Satellite is designed operate under the following conditions:

• Indoor use • Ambient temperature range +5ºC to +40ºC • Altitude to 2000m • Relative humidity not exceeding 80% • Mains supply fluctuations not exceeding 10% • Over voltage category II IEC 60364-4-443 • Pollution degree 2 Note: The control specifications are quoted at an ambient temperature of 20ºC. The specification may deteriorate outsid ...

L'INFORMATION DE SÛRETÉ

Veuillez lire attentivement toutes les instructions de ce document avant d’utiliser le TC-PLUS Satellite. AVERTISSEMENT Les TEMPÉRATURES ÉLEVÉES SONT DANGEREUSES car elles peuvent provoquer de graves brûlures chez l’opérateur et enflammer les matériaux combustibles. Les utilisateurs doivent porter une attention toute particulière aux points suivants : • PROCEDER AVEC PRUDENCE ET PORTER DES GANTS POUR SE PROTEGER LES ...

Câble de rechange

S’il s’avère nécessaire de remplacer le cordon d’alimentation, utiliser un câble de 1 mm² conforme à la norme H05VV-F relié à une prise IEC320. EN CAS DE DOUTE, CONSULTER UN ELECTRICIEN QUALIFIE. CONDITIONS ENVIRONNEMENTALES Le TC-PLUS Satellite est conçu pour fonctionner dans les conditions suivantes: • Pour un usage intérieur seulement • Température ambiante +5°C à +40°C • Altitude inférieure à 2000m • Hu ...

Lesen Sie diese Anleitung vor Verwendung des TC-PLUS Satellite bitte sorgfältig durch.

ACHTUNG HOHE TEMPERATUREN STELLEN EINE GEFAHRENQUELLE DAR. Sie können schwere Brandverletzung verursachen und brennbare Stoffe entzünden. Der Benutzer sollt sich mit den möglichen Gefahren vertraut machen: • UMSICHTIG VORGEHEN UND SCHUTZHANDSCHUHE TRAGEN • KEINE brennbaren Stoffe in der Nähe heißer Gegenstände verwenden • Das Ge ...

Bei einem eventuellen Austausch des Netzkabels wird ein Kabel vom Typ H05VV-F mit 1 mm2

Adernquerschnitt und Europastecker (IEC 320) benötigt. IM ZWEIFELSFALL EINEN ELEKTRO- FACHMANN HINZUZIEHEN. UMWELTBEDINGUNGEN Der TC-PLUS Satellite ist für den Einsatz unter folgenden Bedingungen ausgelegt: • Gebrauch in Innenräumen • Umgebungstemperatur zwischen +5ºC to +40ºC • Höhe: bis zu 2000 m • Relative Feuchte nicht über 80% • Netz ...

INFORMAZIONI DI SICUREZZA

Leggere attentamente il presente manuale prima di usare il TC-PLUS Satellite. AVVERTENZA Le ALTE TEMPERATURE SONO PERICOLOSE in quanto possono provocare serie ustioni agli operatori e dare fuoco al materiale combustibile. Gli utenti devono conoscere i seguenti pericoli potenziali: • PRESTARE ATTENZIONE ED INDOSSARE GUANTI PROTETTIVI PER LE MANI • NON usare sostanze combustibili vicino ad oggetti caldi • NON mettere in fun ...

Accendere lo strumento per mezzo dell'interruttore situato sulla parte anteriore dell'unità.

Cavo di ricambio Qualora occorra sostituire il cavo di rete, si dovrà utilizzare un cavo di 1mm2 codice armonizzato H05VV-F collegato ad una spina IEC 320. IN CASO DI DUBBIO, RIVOLGERSI A UN ELETTRICISTA QUALIFICATO. CONDIZIONI AMBIENTALI Il TC-PLUS Satellite è stato progettato per funzionare nelle seguenti condizioni: • uso interno • range di temperat ...

INFORMACIÓN DE SEGURIDAD

Lea atentamente este manual antes de utilizar el TC-PLUS Satellite. ADVERTENCIA LAS ALTAS TEMPERATURAS SON PELIGROSAS, ya que pueden ocasionar quemaduras graves a los operarios y prender el material combustible. Los usuarios deben conocer los posibles riesgos: • TENGA CUIDADO Y LLEVE GUANTES DE PROTECCIÓN PARA PROTEGERSE LAS MANOS • NO utilice sustancias combustibles cerca de objetos calientes • NO utilice el instrumento ...

Encienda el instrumento usando el interruptor situado en el frente de la unidad.

Cable de repuesto Si es necesario sustituir el cable de alimentación, se debe utilizar un cable de 1mm2 de código armonizado H05VV, conectado a un enchufe IEC320. EN CASO DE DUDA, PÓNGASE EN CONTACTO CON UN ELECTRICISTA. CONDICIONES AMBIENTALES El TC-PLUS Satellite está diseñado para utilizarse en las condiciones siguientes: • Uso en interior • Intervalo de temp ...

For technical, sales or servicing information, contact your local Techne dealer or:

UK Bibby Scientific Ltd. Beacon Road, Stone Staffordshire, ST15 0SA Tel: +44 (0)1785 812121 Fax: +44 (0)1785 810405 e-mail: [email protected] www.techne.com North and South America Bibby Scientific US Inc. t/a Techne Inc. 3 Terri Lane, Suite 10 Burlington, N.J. 08016 USA Toll Free (in NA): 800-225-9243 Tel: +1 609 589 2560 Fax: +1 609 589 257 ...

TC-PLUS SATELLITE SPECIFICATION

TEMPERATURE Block temperature range 0 or 20ºC below ambient to 100ºC Block uniformity <±0.3ºC Temperature accuracy <±0.2ºC Gradient availability Across the full temperature range Maximum gradient 30ºC (16ºC with the 384-well block) Minimum gradient 1ºC Column uniformity with a 10ºC gradient <±0.3ºC Pre-run sample cooling Yes, 4ºC Temperature set point adjustment 0.1ºC HEATING/COOLING RATE Maximum heating rat ...

See also the Safety Information sections on pages 6 to 15.

Front view 1. TC-PLUS Satellite ID and status indicator. 2. Drawer release push panel. 3. Power on/off Rear view 1. Lifting Handle. 2. Mains cable inlet 3. USB port for connection to PC or TC-PLUS. 2 3 1 2 3 1 2 3 1 2 3 1 ...

Place the unit on a suitable flat bench, ensuring that the air inlet vents on the front and rear are

free from obstruction. Two Satellite units may be stacked one on top of the other. 2. Plug the mains cable into the socket on the back of the instrument. 3. Connect to the mains electricity supply with the plug provided or one wired correctly for the supply. Switch the power ON using the switch located on the front of the unit. 4. Open th ...

Techne Workbench opens in the Library screen shown below. See the section LIBRARY on page 33

for further information on the features of this mode. MENU BAR OPTIONS Back and forward arrows Click on these to go back or forward between screens. Programs Click on this to create a new program, open an existing file or exit Techne Workbench. Instruments Click on this to see the connected instruments and their status. The text will ...

Related Devices for Techne TC-PLUS:

Touchgene Gradient
Techne Touchgene Gradient
28.08.2026 41 pages

T o u c h g e n e G r a d i e n t O P E R A T O R ’ S M A N U A L PAGE 1 CONTENTS Touchgene Gradient Operator’s Manual page SAFETY AND INSTALLATION D Instruction booklet for the Techne Touchgene Gradient Laboratory Equipment. It provides guidance on technical overview, hardware setup, safety, shutdown procedures.

RU-200
Techne RU-200
21.03.2026 20 pages

RU-200,RU-500 FC-200 and FC-500 Refrigerated units USER’S MANUAL Issue 11. Date of issue: 3rd May 2005 Techne is a trademark © Techne, 2003 Manual for safe operation of the Techne RU-200 Laboratory Equipment. The manual details component replacement, repair references, technical assistance, setup validation.

FSC400D
Techne FSC400D
01.06.2026 16 pages

Sample Concentrator operator's manual Issue 14 10/15 all-guides com Maintenance and service manual for the Techne FSC400D Laboratory Equipment. It explains maintenance and system configuration, component overview, power management.

RB-5A
Techne RB-5A
29.06.2026 19 pages

P A G E 1 R e f r i g e r a t e d B a t h s U S E R ’ S M A N U A L RB-5A,RB-12A RB-22A Refrigerated Baths OPERATOR’S MANUAL Issue 12 Date of issue: 2 Installation instructions for the Techne RB-5A Refrigerator. This documentation details compatibility information, application scenarios, adjustment procedures, product handling.

TE-10D
Techne TE-10D
06.06.2026 39 pages

Thermoregulator TE-10D, TU-20D and TU-20HT Instruction Manual TECH0001 / Version 1.0 Art. no.: 083010 Heating element with thermostat and stirrer (TE-10D) Nijv Comprehensive guide for the Techne TE-10D Controller. It details operating modes and error codes, operational safety, interface navigation, technical overview.

425H
Techne 425H
23.06.2026 30 pages

Issue 6. Date of issue: 23rd July 2003  Techne is the trademark of Techne and Techne Inc. © Techne , 2003 Tecal 425H Calibrator Operator's Manual Installation guide for the Techne 425H Test Equipment. The document contains assembly reference, power management, setup tips.

Barloworld Scientific HB-1D
Techne Barloworld Scientific HB-1D
29.03.2026 27 pages

HB-1D Hybridiser Operator’s Manual Issue 25 Date of issue: 3rd May 2005 Techne is a trademark © Techne, 2003 Device operation guide for the Techne Barloworld Scientific HB-1D Kitchen Appliances. The guide covers usage and cleaning instructions, interface navigation, diagnostic information, user instructions.

TC-PLUS
Techne TC-PLUS
07.04.2026 46 pages

TC-PLUS Satellite and Techne Workbench PC Software OPERATOR’S MANUAL Version 1.3 11/10 Installation and operation manual for the Techne TC-PLUS Laboratory Equipment. The document highlights operating procedures and functional overview, safety, setup guidelines, user settings.

Laboratory Equipment: Frequently Requested PDF Instructions

RA6 Series
Renesas RA6 Series
12.06.2026 20 pages

Rev.1.00 May 2020 Renesas RA Family RA6 Series User’ s Manual www.renesas.com All information contained in these materials, including products and product sp User instruction manual for the Renesas RA6 Series Control Systems. This manual provides information on wiring setup, safety guidelines, power management, operational procedures.

540 Series
ATS 540 Series
24.03.2026 27 pages

MAN - Series 540 Vertical Sealant Tester - REV: Original Series 540 Vertical Sealant Tester INSTRUCTION MANUAL This manual contains important operating and safe Operation guide for the ATS 540 Series Test Equipment. It includes troubleshooting procedures and power requirements, maintenance procedures, safety precautions, service procedures.

LF Series
Shinko Denshi LF Series
08.06.2026 154 pages

380002M 21 Semi-micro and Analytical Balance LF Series Operation Manual ●To ensure safe and proper use of the balance, please read this manual carefully. ●A Step-by-step user manual for the Shinko Denshi LF Series Laboratory Equipment. It includes troubleshooting procedures and error codes, device overview, product safety.

SimpliMet 1000 The Twins
Buehler SimpliMet 1000 The Twins
20.08.2026 4 pages

BUEHLER SIMPLIMET 1000 AUTOMATIC MOUNTING PRESSES “The Twins” Operating Instructions Official user handbook for the Buehler SimpliMet 1000 The Twins Laboratory Equipment. It includes troubleshooting procedures and safety, shutdown procedures, operational guidelines, performance optimization.