Techlogix TL-FO-USB3-01 Operation & User’s Manual

Please read this guide thoroughly. FCC Radio Frequency Interference Statement Warning This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received in ...

...

guidelines. The instructions in this guide assume a general knowledge of computer installation procedures, familiarity with cabling requirements, and some understanding of USB devices. Your TL-FO-USB3-01 is packaged with: • Host Ext ...

Power OFF Unit is not powered or not powered properly. 2 Status Blinking Waiting for connection to Remote Extender. Status ON Local/Remote Extender are linked and operating normally. Status OFF Fault detected; power cycle required ...

Used to connect USB 3.0 device(s) to the Client Extender unit. Ports accept locking or non-locking USB 3.0 Type A connectors. 2 Power ON Unit is powered properly. Power OFF Unit is not powered or not powered properly. 3 Status Blinking Waiting for ...

USB 3.0 Cameras Client Extender Assembly Line Computer & Monitor USB 3.0 up to 100m over multimode fiber Host Extender To complete installation of the TL-FO-USB3-01, you will also require the following items that are not included with the product: • USB 3.0 compatible computer ...

Preparing Your Site Preparing Your Computer Windows (7/8/8.1/10) Before you can install the TL-FO-USB3-01, you need to prepare your site: 1. Determine where the computer is to be located and set up the computer. 2. Determine where you want to locate the USB device(s). 3. Ensure fiber optic cabling is in place, prepare ...

4. Select “Never” for “Put the computer to sleep” for all the configurations presented. 5. Click Change advanced power settings. 6. Expand “USB settings” 7. Expand “USB selective suspend setting” 8. Select “Disabled”. ...

2. Select Energy Saver. 3. For both Battery and Power Adapter power settings, move slider bar to “Never” for “Computer Sleep”. ...