Tech Works CI-MSI-22 Quick Reference Manual

Text of Tech Works CI-MSI-22 Quick Reference Manual

Page 2 of 4

Front Controls and Indicators: Power indicator: Green, when operating Normally CI-BUSS, ALERT Active Indicator: Green, when the Operator Microphone is Active PA-BUSS Input, ALERT Indicator: Green, when the PA-BUSS Input is Active Microphone Gain: 16 Position Rotary Switch, factory set to 8, 3dB/Step, 45dB Range Talk Level Indicator: Green, low i ...

Tech Works, Inc., 7430 Eastgate Road, Suite 130, Henderson, NV 89011

Tech Works CI-MSI-22 Direct Line: 702-846-1080 Toll Free: 1-800-813-1080 Web site www.tech4people.com 6/17 CI-MSI-22 QUICK REFERENCE GUIDE The MSI-22 is a Microphone and Speaker Interface for our Collaborative Intercom family of products. The can be two Microphones (One from the Microphone Input; one from the ...

Page 4 of 4

Tech Works CI-MSI-22 Configuration Options: The MSI-22 is designed to accommodate many applications. For most applications the factory default setting is sufficient. For ‘special’ applications a few jumpers may need to be moved. These Jumpers determine how the MSI-22 interacts with other Components of the System Before attempting a Configuration you should review ...

Page 3 of 4

Initial Adjustments: There are both Input and Output Controls with associated Indicators When the Indicators are green the associated control is enabled The Audio may be 'Keyed' depending on the Configuration and system setup Only attempt adjustments if the associated indicator is lighted green! The CI-BUSS uses a standard audio level of ~0dBm RM ...

Tech Works, Inc., 7430 Eastgate Road, Suite 130, Henderson, NV 89011

Direct Line: 702-846-1080 Toll Free: 1-800-813-1080 Web site www.tech4people.com 6/17 CI-MSI-22 QUICK REFERENCE GUIDE The MSI-22 is a Microphone and Speaker Interface for our Collaborative Intercom family of products. The can be two Microphones (One from the Microphone Input; one from the PA-BUSS Input using a PA-MI-1) Two Speaker outputs (One from the Speaker Output; one from the PA-BUS

Page 2 of 4

Front Controls and Indicators: Power indicator: Green, when operating Normally CI-BUSS, ALERT Active Indicator: Green, when the Operator Microphone is Active PA-BUSS Input, ALERT Indicator: Green, when the PA-BUSS Input is Active Microphone Gain: 16 Position Rotary Switch, factory set to 8, 3dB/Step, 45dB Range Talk Level Indicator: Green, low input level; Green, flashing to Red, Normal Operation, with Local Microphone, and ALC is active Notch

Page 3 of 4

Initial Adjustments: There are both Input and Output Controls with associated Indicators When the Indicators are green the associated control is enabled The Audio may be 'Keyed' depending on the Configuration and system setup Only attempt adjustments if the associated indicator is lighted green! The CI-BUSS uses a standard audio level of ~0dBm RMS The Digital Rotary Switch (3dB/Step) is used to set Microphone Gain The nominal Microphone gain is

Page 4 of 4

Configuration Options: The MSI-22 is designed to accommodate many applications. For most applications the factory default setting is sufficient. For ‘special’ applications a few jumpers may need to be moved. These Jumpers determine how the MSI-22 interacts with other Components of the System Before attempting a Configuration you should review the "BUSS Systems Guide" CI & PA, BUSS sections The MSI-22 consists of five Functional Modules: Two

Tech Works Recording Equipment Owners Instructions: