TCi Turbo Hydramatic 350 Installation Instructions

Body Installation Instructions TCI®’s Manual/Automatic Valve Body gives you that hi-performance street/strip feeling. It provides firm positive shifts for full performance street use. Automatic shift features are retained in drive position. This valve body also works well with heavy-duty vehicle app ...

Put them in the oil pan. (See Figure 1) STEP 3 Observe the location of the following: (See Figure 1) Manual linkage, detent spring and roller, s-link or offset link, detent control valve link and lever, and support plate. STEP 4 Remove pivot clip holding detent con ...

separator plate. (See Figure 4) You want the support to be flat. If your stiffener plate is bent or excessively warped, it should be replaced. STEP 8 Scrape any excess gasket material that may be stuck to the case surface. This is very important as stray gasket c ...

position. Engage manual valve linkage in selector lever. S-link can only install one way. Offset linkage must be installed with the link in the forward position. Install valve body bolts finger tight. Install detent roller spring so it engages selector lever. Tigh ...