RS PRO RSPD3303C Quick Start Manual

Please review the following safety precautions carefully to avoid personal injury or damage to this product or any product connected to it. To prevent potential danger, please use the instrument as specified. Use proper power cord Only the power cord designed for the instrument and authorized by local country could be used. Power sup ...

Inadequate ventilation may cause an increase of temperature, which will lead to further damage. Please keep proper ventilation and check the fan and air-vents regularly when using the instrument. Operate condition Location: indoor, no strong light, almost no Interfering pollution Comparative humidity: <80% Altitude: <2000m Temperatu ...

Terms may appear on the product: DANGER: Indicates direct injury or hazard that may happen. WARNING: Indicates potential injury or hazard that may happen. CAUTION: Indicates potential damage to the instrument or other property that may happen. Symbols may appear on the product: Hazardous Protective Warning Earth Power Voltag ...

convenient, flexible and multi-function. It is designed with three groups of independent output terminals, the output voltage of two groups is adjustable and another group is fixed to select: 2.5V, 3.3V, and 5V. The instrument also provides output short circuit and overload protection. ...

In this chapter, we mainly introduce the panel display interface and inspecting the new machine. Reading the following steps will give you a quick understanding on operation. General Inspection 1. Inspect the shipping container. Keep the damaged shipping container or cushioning material until the contents of the shipment have been com ...

necessary inspection before using the RSPD3303C. Input Power Requirement The RSPD3303C allows a 50Hz/60Hz frequency, and four levels of AC power: 100V/120V/220V/230V. You can select required power voltage with the “DIP Switch ” at the rear panel according to the actua ...

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 NO. Description NO. Description 1 Logo 9 CH3 DIP Switch 2 LED Display 10 Power Switch 3 Model 11 CH1 Output Terminal 4 Configuration button 12 Ground Terminal 5 Multi-function knob 13 CH2 Output Terminal 6 Fine Adjust button 14 CV/CC Indicator Light 7 Voltage/Current button 15 CH3 Output Ter ...

Buttons for setting parameters NO.1- 5 : Press the button to choose the storage location SER PARA LOCK SAVE : Press the button to set series mode of CH1/CH2. : Press the button to set parallel mode of CH1/CH2. : Long press the button to turn on/off the keylock function. : Press the button to enter the storage system for saving files ...

The positive/negative output terminals of CH1, CH2, CH3, and the common GND for CH1, CH2 are located on the front panel. Refer to later “control panel operation” for wiring method details. ...