Rosslare AC-Q41HB Installation And Programming Manual

Models: AC-Q41HB AC-Q41HP AC-Q41SB AC-Q42HB AC-Q42HP AC-Q42SB ...

This manual and the information contained herein are proprietary to ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’ (hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to use the information. No part of this manual may be re-produced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permis ...

AC-Q4x Series Installation and Programming Manual iii Table of Contents 1. Introduction ................................................................ 9 1.1 Controller Types ...................................................................... 9 1.2 Box Content ......................................................................... 10 1.3 Ancillary Equipment .............................................................. 10 1.4 Front ...

iv AC-Q4x Series Installation and Programming Manual 4.6 Tamper Feature ..................................................................... 28 4.7 Lockout Feature (Keypad/Card Tamper) .................................. 28 4.8 BL-D40 External Sounder ....................................................... 29 5. Programming ............................................................ 30 5.1 Entering the Programming Mode .................. ...

AC-Q4x Series Installation and Programming Manual v 5.13.1 Primary Codes Definition .............................................................. 45 5.13.2 Secondary Codes Definition .......................................................... 46 5.13.3 Enrolling Methods ........................................................................ 46 5.14 Deleting Primary and Secondary Codes ................................... 49 5.14.1 Deletin ...

vi AC-Q4x Series Installation and Programming Manual List of Figures Figure 1: Front Panel........................................................................................ 11 Figure 2: Drilling Holes Identification ............................................................... 14 Figure 3: Pre-Wired Connection for Lock Strike Relay & REX............................ 17 Figure 4: Pre-Wired Connection for Auxiliary Input & Output ..... ...

AC-Q4x Series Installation and Programming Manual vii List of Tables Table 1: Wire Color Guide ............................................................................... 16 Table 2: Programming Menus.......................................................................... 30 Table 3: Quick Reference Guide for Auxiliary Mode Setting ............................. 38 ...

Notice and Disclaimer This manual’s sole purpose is to assist installers and/or users in the safe and efficient installation and usage of the system and/or product, and/or software described herein. BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM, THE INSTALLER AND THE USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY REQUIREMENTS AND OPERATING PROCEDURES.  The system mus ...

9 1. Introduction The AC-Q4x series are vandal resistant standalone controllers. All the units are water resistant and suitable for indoor or outdoor mounting. The unit(s) accepts up to 500 users and allows entry via a personal identification number (PIN) and/or by presenting a proximity card. 1.1 Controller Types The different types of control units described in this manual are:  Type 41 � ...

1.2 Box Content Before beginning, verify that all of the following is in the box. If anything is missing please report the discrepancy to your nearest Rosslare Office.  One controller unit  Installation kit  1 drilling template (label/sticker)  1 security spline key  1 security hex screw  4 mounting screws and wall plugs 1.3 Ancillary Equipment The following ancillary equip ...

11 1.4 Front Panel Description Controls and indicators of all controller versions are identical (excluding the antenna, which is unique to Q42 and Q44) (Figure 1). Figure 1: Front Panel ...

2. Technical Specifications AC-Q41HB AC-Q42HB AC- Q41SB AC- Q41HP AC- Q42SB AC- Q42HP AC-Q44 Input Voltage VDC 12–24 VDC VAC 12–24 VAC 16–24 VAC 12–24 VAC 16–24 VAC Maximum Input Current (12 VDC) Heater Off 130 mA 125 mA 145 mA 130 mA 145 mA 125 mA Heater On 610 mA 605 mA 625 mA 610 mA 625 mA N/A Standby Input Current (12 VDC) Heater Off 70 mA 65 mA 85 mA 70 mA 85 mA 65 ...

13 AC-Q41HB AC-Q42HB AC- Q41SB AC- Q41HP AC- Q42SB AC- Q42HP AC-Q44 Proximity Modulation N/A ASK at 125 kHz N/A ASK at 125 kHz Proximity Card Compatibility N/A 26-Bit EM cards N/A 26-Bit EM cards LED Indicators Two tri-colored LED (Mode and Door) Operating Temp. Range -20ºC to 60ºC (-4ºF to 140ºF) Outdoor Usage Water resistant, meets IP54 Weather resistant, epoxy-potted, meets I ...

3. Installation Installation of an RFID reader adjacent to metallic surfaces might alter the reader’s specifications. To diminish this interference, use a plastic spacer when mounting the reader. 3.1 Mounting Prior to starting, select the location where the controller unit is to be mounted. To mount the controller: 1. Peel off the back of the self-adhesive mounting label template and place ...

15 The central hole, marked “C” is for routing the wiring to the controller. 5. Drill an additional 10-mm (7/16”) hole for the cable. When installing the reader on a metallic surface, cover the inside of the hole with a grommet or electrical tape. 6. Insert the unit’s cable wire into the cable hole and wire the unit as described in Section 3.2. 7. Screw the back plate into the surface. ...

3.2.1 Pre-wired Models These units are supplied with a 10-conductor 60-cm (24-in.) pigtail (24-AWG cable) with exposed wires coated with solder. To wire the controller: 1. Select the appropriate connections according to Table 1. Table 1: Wire Color Guide Color Description Red V input Black Ground Green REX/BL White In/Monitor Purple Lock: Com Gray Lock: N.O. Brown Lock: N.C. Blue Aux: Com Ye ...