Audiovox PRO-OE3C Program Manual

Model : PRO-OE3C The transmitters included with the security system have been pre-programmed at the factory, with each button pre-assigned to control a specific function of the security system. Although the security system in the vehicle has either a 3 or 4 channel receiver, depending on the model, the transmitters included with the system are capable of transmitting 7 distinct signals. This allows you to program each transmitter to more than one vehicle in two car families, and also allows you to change which button(s) control certain functions of the system. (Example: Transmitter channel 5 can be programmed to activate ...

It is important to remember that during programming, each individual step of the procedure must be executed within 15 seconds of the previous step. When the 15 second time limit is allowed to expire, the system will automatically terminate the programming mode. This is indicated by a long chirp from the siren. NOTE: Some keyless entry systems will flash the interior light to indicate a stored code. Substitute the words light flash below where indicated sounding device will beep. Additionally, the system will store codes from up to four different transmitters. If a 5th transmitter is programmed to any receiver channel, ...

times, indicating the system is ready to accept programming for receiver's channel 4. 16. Press and hold any button combination as shown on the front cover of this guide until the sounding device emits a long beep, indicating the signal has been stored into memory. 17. If you have additional transmitters (up to 4) that need to be programmed, repeat step 16 for each transmitter. 18. Press and release the valet push-button switch once. 19. The dash LED will flash four times, and the sounding device will beep four times, indicating the system is ready to accept programming for ...

MODEL NO. PRO-OE3C IMPORTANT : To help us expedite your order, please print all of the information legibly, and mail this form and your payment according to the instructions below. Note: Order Pad # 17 if your unit has red colored Lock/Unlock pads. Order Pad # 18 if your unit has blue colored Lock/Unlock pads. 1. Name : ____________________________________________________ Address : _____________________________________________________ City : _____________________ State : _______ Zip Code : ____________ 2. Telephone Number : ( _______ ) _________________________________ 3. Enter the total number of transmitters re ...