Mezger TH 210 Operating Instructions Manual

TH 210 Page: 1 Change: 02/2019 ET 598 Page 1 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx Operating Instructions Pneumatic table stapler TH 210 IMPORTANT Before the first commissioning read this manual thoroughly and completely and keep it in a safe place. Observe and follow the ...

TH 210 Page: 2 Change: 02/2019 ET 598 Page 2 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx Contents overview 1 Conformity ...................................................................................................................... 2 2 Safety information ................ ...

TH 210 Page: 3 Change: 02/2019 ET 598 Page 3 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx Read all these instructions before using the stapling device and keep the safety instructions in a safe place. Safety on the well. The operating personnel must be trained in the handling of ...

TH 210 Page: 4 Change: 02/2019 ET 598 Page 4 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx 5 Ambient conditions/Emission The stapling device should be operated at room temperature, protected against environmental influences. Use within an explosive atmosphere is permitted only wi ...

TH 210 Page: 5 Change: 02/2019 ET 598 Page 5 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx 8 Fundamental notes on the work technique and handling Before the operator starts to use the machine he must acquire information about the application scenario and check if the stapling dev ...

TH 210 Page: 6 Change: 02/2019 ET 598 Page 6 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx 10 Maintenance and care CAUTION! Before performing any maintenance work, the compressed air supply must be disconnected. Any kind of alteration to the stapling device (e.g. drill holes) sh ...

TH 210 Page: 7 Change: 02/2019 ET 598 Page 7 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx The following work processes/inspections should be performed by knowledgeable personnel on a regular basis:  Regular oiling of the movable parts (no graphite oil!) - on a weekly basis � ...

TH 210 Page: 8 Change: 02/2019 ET 598 Page 8 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx 14 Setting the stapling device Lateral staple spacing The insert staplers can be adjusted to the desired stapling dimensions. To do this, loosen the three screws V1 to move the insert stapl ...

TH 210 Page: 9 Change: 02/2019 ET 598 Page 9 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx 15.1 No stapling occurred or the staple wasn't fully bent, or it remains in the stapling device Fault Cause Remedy No pressure indication Shut-off valve closed. Open the shut-off valve. Pre ...

TH 210 Page: 10 Change: 02/2019 ET 598 Page 10 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx 17 Notice of residual risks Do not reach into the stapling device or the staple outlet opening when the stapler is in working order! DANGER OF injury! Compressed air connections must be ...