Norbord CSS 1610 Assembly Manual
Text of Norbord CSS 1610 Assembly Manual
Installation should be performed by a competent person
only. This product could be dangerous if incorrectly installed.
Check the pack to ensure all of the components are included.
When you are ready to start, make sure that you have all of
the correct tools to hand, have plenty of space, and that the
area for building is clean and dry.
Do not rush! Read these instructions first and run through
the sequence before you begin. Assembly should be
carried out i
CSS 1610 07/15
SINGLE WIDTH WALL CABINETS
JOINING & LEVELLING
Mark 20mm on a 3mm dia. drill bit with masking
tape. Drill between the 2 holes drilled for the hinges,
through one cabinet side into the next, stopping when
you reach the marker.
Join the cabinets together with 2 x screws.
F
Push shelf support into
chosen shelf position holes,
4 per shelf.
Tilt and slide in shelf.
SHELF FITTING
NOTES:
J
3mm
90°
F
FIXING TO WALL
Position