Omron SYSMAC CJ2H-CPU6@-EIP Connection Manual

No.FST-ZTH130453A OMRON Corporation E3NW-ECT Digital Sensor Communication Unit P562-E1-01 ...

Microsoft product screen shots reprinted with permission from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the USA and other countries. Ethernet is a registered trademark of Xerox Corporation. EtherCAT® is registered trademark and patented technology, licensed by Beckho ...

1. Related Manuals........................................................................................ 1 2. Terms and Definitions............................................................................... 1 3. Remarks ..................................................................................................... 2 4. Overview ...

1 1. Related Manuals The table below lists the manuals related to this document. To ensure system safety, make sure to always read and heed the information provided in all Safety Precautions, Precautions for Safe Use, and Precaution for Correct Use of manuals for each device which is used in the system. Cat. No. Model Manual name W472 CJ2H ...

margin for ratings and performance. Provide safety measures, such as installing safety circuit in order to ensure safety and minimize risks of abnormal occurrence. (2) To ensure system safety, always read and heed the information provided in all Safety ...

(E3NW-ECT) of OMRON Corporation (hereinafter referred to as OMRON) to CJ-series Programmable Controller + Position Control Unit (hereinafter referred to as the PLC) and provides the procedure for checking their connection. Refer to EtherCAT sett ...

5.2. Device Configuration The hardware components to reproduce the connection procedure of this document are as follows. USB cable Personal computer (CX-One installed, OS:Windows 7) Ethernet cable CJ2M-CPU12 + CJ1W-NCF82 DS-Bus E3NX-FA0 E3NW-ECT + E3NX-FA0 E3NW-DS + Manufacturer Name Model Version OMRON Position Con ...

Additional Information For information on the specifications of the Ethernet cable and network wring, refer to 3-4 Wiring of the CJ-series Position Control Unit Operation Manual (Cat. No. W487). Additional Information The system configuration in this document uses USB for the connection between the personal computer ...

6. EtherCAT Settings This section describes the procedure for connecting the PLC to the Digital Sensor Communication Unit via EtherCAT. 6.1. EtherCAT Communications Settings The settings required for communications between the PLC (Position Control Unit) and the Digital Sensor Communication Unit are given below. 6.1.1. EtherCAT Communica ...

6.2.2. Cable Wiring Diagram For details on the cable wiring, refer to A-2-3 DS-Bus Network Wiring of the EtherCAT® Digital Sensor Communication Unit Operation Manual (Cat. No. E429). Check the connector configuration and pin assignment for wiring. ▪Connector configuration and pin assignment Applicable connector: Termi ...