IASUS EAR3 Operating Instructions
Text of IASUS EAR3 Operating Instructions
IASUS EAR3 EAR3 Micro Amp (IA-E3-AMP)
Operating Instructions v1.0
Introduction
Thank you for purchasing the EAR3 Micro Amp. In this document you will find
instructions on operating the EAR3. Should there be any questions, please feel free to
contact us at [email protected].
Package Contents
EAR3 Amp
Micro USB to 3.5mm Audio Input Cable
Micro USB Charging Cable
iASUS Concepts Information Card
EAR3 Layout and Controls
The EAR3 comes shipped from iASUS with its internal lithium-ion battery already
charged and ready for use.
When charging is needed, connect the included USB cable to the micro-USB port on the
bottom of the unit and the other end to a computer. The hidden LED recharge indicator
will be lit red when it is charging and turn off when charging is complete.
Operation with MP3 Audio Device or Smartphone, Volume Adjustment
When the EAR3 is used with a M
Once everything is connected, turn on your smartphone or mp3 and set the volume at a
low level.
Next, power on the EAR3 by turning the volume knob clockwise and slide the mic switch
to the
"mic on" position.
While listening to the headphones/earphones, turn up the volume slowly until you can
hear the music comfortably.
Speak or tap the EAR3 to hear the outside mic signal. You can test the EAR3 Mic
function by turning off the Mic
and you should not be a
Operation with Music only
When operating in an environment that does not require background sound input, you
can turn the mic off
and use the volume knob to only amplify your music. The sound
should be cleaner and more solid than using a direct signal from your source.
The volume will also have a much higher level than from the source alone.
**Note - Do not turn the volume too high as the EAR3 does have the potential to
damage headphones and earphones sh