Yoder Smokers A91425 Manual 

A91425 & A91426 For YS640 & YS480 Backyard Models VERSION 1.0 , October 2015 ...

9/16´´ wrench 9/16´´ socket Floor jack (optional) 3 scrap pieces of 2x4 lumber Parts required: A91425: 3´´ caster kit (x2) 1. 91221 caster wheel arm 2. 91222 caster wheel 3. 91349 wheel bushing 4. 3816X1WHB 5. M6X1.0HNN 6. M6X1.0X38HB A91456: 8´´ wheel kit (x2) 1. 24252 8´´ wheel 2. ...

hopper side. Using two people, lift the chimney end and GENTLY place the hopper on the blanket. 6. Use a 9/16´´ wrench to remove the nut located inside the caster leg. 7. Unscrew the caster wheel from the plate. 8. Install the new caster wheel by first attaching the arm (91221) to t ...

to the arm and hand tighten the M6X1.0HNN onto the bolt. Secure the wheel in place using two 10mm wrenches to tighten the nut and bolt onto the arm. *Attention* the next step requires two people to perform 12. Using 2 people, carefully lower the chimney end back onto the ground. Refer to ...