VADDIO RoboTRAK Installation Manual

Text of the manual

Installation Guide for the

RoboTRAK Presenter Tracking System Document 342-1231 Rev. B October 2016

What's in this Guide

1 Overview 1 Features 1 IR Camera 1 IR Source Lanyard 1 Unpacking the System 2 North America 3 Europe and UK 3 Australia and New Zealand 4 A Quick Look at the RoboTRAK System 5 Front of the IR Camera 5 Connectors 5 Lanyard 6 Before You Start 7 Network Requirements 7 Additional Equipment 7 Lighting and IR 7 Camera Location 9

What's in this Guide

This guide covers: n System features n Unpacking the RoboTRAK™ IR camera n Descriptions of the hardware n Tips for a successful installation n Instructions for installing the camera mount n Information on connecting and mounting the camera n Camera power-on The Configuration and Administration Guide for the RoboTRAK Presenter Trackin

Unpacking the System

Make sure you received all the items you expected. Vaddio recommends purchasing a second lanyard as a spare or for smooth transitions between multiple presenters. Note In addition to the items listed here, you will need a video camera. Any RoboSHOT series camera can be used. If remote viewing is desired, you must use a video camera that

Part number 999-9950-000, RoboTRAK in silver and black

Part number 999-9950-000W, RoboTRAK in white n Vaddio RoboTRAK IR camera n PoE+ power injector n AC cord set for North America n PoE splitter n Power cable, 1 ft (30 cm) n Cat-5e cable, 1 ft (30 cm) n Cat-5e cable, 10 ft (3 m) n Wall mount with mounting hardware n IR lanyard n USB charger n

Australia and New Zealand

Part number 999-9950-001, RoboTRAK in silver and black Part number 999-9950-001W, RoboTRAK in white n VaddioRoboTRAK IR camera n PoE+ power injector n AC cord set for Australia and New Zealand n PoE splitter n Power cable, 1 ft (30 cm) n Cat-5e cable, 1 ft (30 cm) n Cat-5e cable, 10 ft (3 m) n Wall mount with mounting hardware n IR

A Quick Look at the RoboTRAK System

This section covers the physical features of the RoboTRAK system: n IR camera n Tracking Lanyard The RoboTRAK system requires a video camera as well. You can use any Vaddio RoboSHOT camera as the video component of the system. Note If remote viewing is desired, you must use a video camera that is capable of streaming. Thes

Vaddio recommends purchasing a second lanyard as a spare or for smooth transitions between multiple

presenters. Medallion – Houses charging and control circuitry, switches to standby (low-power) mode when the IR camera switches to standby. n Button – On/off switch for IR sources n Illuminated ring – Visual status indicator directs light toward

Before You Start

Ensure that the room is suitable for the RoboTRAK system, and that all the required elements of the installation are present. This section covers the requirements for a successful installation. Note Copy the default hostname from the label on the bottom of the camera, and keep this information in a place where it will be available to anyone

Other Digital Presenters Manuals