ShoreTel 480 Installation Manual

l One Philips screwdriver l Stud Finder (optional) Included Items: l 4 each, wood screws l 4 each, “molly” hollow wall anchors l 8 each, 18mm M4 Torx T20 screws l 2 each, Ethernet cables l ShoreTel IP Phone Wall Mount Adapter Remove the Phone Stand 1. Grasp the phone stand in one hand and the base of the phone in the other. Pull the stand off the base until it unsnaps. Set the stand aside. 2. ...

Tip: Before attaching the Mounting Adapter, refer to Options A and B on Page 3 to determine what lenth of Ethernet cable to use. 1. Position the Mounting Adapter on the rear of the ShoreTel IP Phone. 2. Attach the Mounting Adapter with the four Torx screws. 3. Reconnect the Handset cable to the Handset port as shown. If using Option A, Install Wall Mount Bracket Over Ethernet Connector, continue to Step 4. Note: If using ...