Warn 39116 Installation Instructions

installation and operating instructions and other information on labels and in this guide. This information alerts you to potential hazards that could hurt you or others. It is not possible to warn you about all potential hazards associated with this product, you must use your own good judgment. CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT. This ...

incl 1 Winch Frame Kit incl 1 Hitch Pin and Clip incl 1 Plug, Quick Disconnect 31879 1 Quick Disconnect Cable, Winch 26405 1 Quick Disconnect Cable, 90 inch TOOLS REQUIRED 7/16” Wrench (2) 1/4” Drill bit and Drill motor Correct wrenches for connection to battery termnal Safety Glasses TORQUE SPECIFICATIONS 1/4 8 lb. ft..(10.8 N-m) BEFORE YOU BEGIN The WARN Multi-Mount Winch System is to be used only with a WARN Multi-Mount Front Receiver or a class 3 receiver hitch. When the winch is used at the rear hitch of a vehicle, use a 20’ (p/n 32963) or 2 ...

the winch power cable quick disconnect. When routing the cables note the Injury Hazard Warnings referring to electrical cable routing at the beginning of these instructions. A plug is furnished to keep the vehicle quick disconnect clean when not in use. The lanyard can be attached to one of the cables or to a location of your choice. WARNING: Always inspect the quick connect polarity on the cable from the battery AND the cable from the winch, before connecting the cables to the battery. Make sure the positive (+) cab ...

that appears rusted or deformed. 2. Inspect all nuts and bolts on the winch, winch mount, and related hardware prior to each use. Tighten all nuts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced. 3. Check all cables prior to use. Replace cables that look worn or frayed. 4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely. WARNING FAILURE TO SECURELY TIGHTEN ALL BOLTS ON THE WINCH PLATE, WINCH, AND FAIRLEAD ...