Trolla 12823 Quick Start Manual

Artikel nr.: 12823 Version: 2016/01 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may contain small parts, therefore save all packaging until the product is fully assembled. The product can be attached to the package be careful when unpa ...

Before using the appliance for the first time, an electrician must check that the necessary electrical protection measures have been taken. No one is in the liquid that will be pumped while the pump is in operation. The pump may be operated i ...

+35°C. This pump is not to be used to pump combustible, gaseous or explosive fluids. The pumping of aggressive fluids (acids, alkalis, silo seepage etc) and abrasive substances (sand) should also be avoided Areas of use: For irrigating and ...

Depending on the suction height and the amount of air in the intake line, priming can take anywhere between 30 seconds and 5 minutes. If it takes longer than this, the pump should be refilled with water. If the pump is removed again after use, it must always be refilled with water wheneve ...